#10-32 Phillips Flat Head Screws Black Oxide 18-8 Stainless Steel

#10-32 Black Oxide Stainless Steel Phillips Flat Head Machine Screws

Diameter - Thread Pitch: #10-32


  • Black oxide finish adds an extra layer of corrosion and abrasion resistance to stainless steel
  • A machine screw is commonly identified by its small size
  • Commonly used for its sleek black look
  • Chemically treated with a layer of wax or oil
  • Commonly used for:
    • Tattoo Guns
    • Black Tools
    • Cars
    • Motorcycles

#10-32 Phillips flat head machine screws are available in black oxide stainless steel.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Phillips Flat Head MS Black Oxide 18-8 SS - #10-32 x 3/8" (FT)
SKU #1016-77000000-001
Phillips Flat Head MS Black Oxide 18-8 SS - #10-32 x 3/8" (FT)
SKU #1016-77000000-001
1
NA
25
$7.00 (0.28/ea)
100
$22.00 (0.22/ea)
1000
$200.00 (0.2/ea)
Subtotal: $0.00 /
Phillips Flat Head MS Black Oxide 18-8 SS - #10-32 x 1/2" (FT)
SKU #1016-77000000-014
Phillips Flat Head MS Black Oxide 18-8 SS - #10-32 x 1/2" (FT)
SKU #1016-77000000-014
1
NA
25
$7.75 (0.31/ea)
100
$25.00 (0.25/ea)
1000
$230.00 (0.23/ea)
Subtotal: $0.00 /
Phillips Flat Head MS Black Oxide 18-8 SS - #10-32 x 3/4" (FT)
SKU #1016-77000000-026
Phillips Flat Head MS Black Oxide 18-8 SS - #10-32 x 3/4" (FT)
SKU #1016-77000000-026
1
NA
25
$8.25 (0.33/ea)
100
$31.00 (0.31/ea)
1000
$300.00 (0.3/ea)
Subtotal: $0.00 /
Phillips Flat Head MS Black Oxide 18-8 SS - #10-32 x 1" (FT)
SKU #1016-77000000-038
Phillips Flat Head MS Black Oxide 18-8 SS - #10-32 x 1" (FT)
SKU #1016-77000000-038
1
NA
25
$10.25 (0.41/ea)
100
$38.00 (0.38/ea)
1000
$350.00 (0.35/ea)
Subtotal: $0.00 /

Frequently Used With

1
$1.04 (1.04/ea)
10
$8.10 (0.81/ea)
25
$19.50 (0.78/ea)
50
$38.00 (0.76/ea)
Subtotal: $0.00 /
1
NA
25
$6.25 (0.25/ea)
100
$17.00 (0.17/ea)
1000
$150.00 (0.15/ea)
Subtotal: $0.00 /
1
NA
25
$4.25 (0.17/ea)
100
$13.00 (0.13/ea)
1000
$120.00 (0.12/ea)
Subtotal: $0.00 /

Product Specifications
Color
Black
Corrosion Resistant
Yes
Countersink
82 Degree
Drive Style
Phillips
Finish
Black Oxide
Grade
18-8
Head Diameter
Max 0.385 - Min 0.340
Head Style
Flat
Material
Stainless Steel
Overall Head Height
Max 0.116 - Min 0.098 (From Bottom of Undercut to Top of Head)
Phillips Drive
#2
Product Type
Phillips Flat Head Machine Screws
System of Measurement (Unit)
Inch
Thread Diameter
(#10) Max 0.1891 - Min 0.1831
Thread Direction
Right Hand
Thread Pitch (Count)
32 Per Inch
Thread Standard
UNF
Thread Type
Fine
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances