Machine Screws, Phillips Flat Head, Stainless Steel 316, 5/16"-18 x 3/4"
Diameter - Thread Pitch: 5/16"-18
Quantity | Unit price |
---|---|
To 99 |
$0.61*
|
To 999 |
$0.41*
|
From 1000 |
$0.36*
|
- ANSI: ANSI B18.6.3
- Class: 2A
- Color: Silver
- Corrosion Resistant: Yes
- Countersink: 82 Degree
- Diameter: 5/16"
- Drive Style: Phillips
- Head Type: Flat Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 2A
- Grade: 316
- Head Height Max: 0.191
- Head Diameter: Max 0.635 - Min 0.568
- Head Style: Flat
- Length: 3/4"
- Marine Grade: Yes
- Material: Stainless Steel
- Overall Head Height: Max 0.191 - Min 0.165
- Part Number: 2220000 720572114188
- Phillips Drive: #4
- Product Type: Machine Screws
- Standards Met: ANSI B18.6.3
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 18 Per Inch
- Thread Size: 5/16"-18
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Fully threaded
- 82-degree taper
- A machine screw is commonly identified by its small size
- Screw head lays flush with the installation surface
- Superior corrosion resistance when compared to standard grade (18-8 / 304) stainless steel
- Suitable for harsh environmental conditions such as:
- Boats
- Marinas
- Docks
5/16"-18 Stainless steel Phillips flat head machine screws are available in 316 stainless steel.
Product number:
2200-014-002