Zinc Plated Nylon Insert Lock Nuts
Lock Nut with a Nylon Insert in Zinc Plated Steel
- Hexagonal shape Nylon Lock Nut
- Nylon material creates pressure against the fastener
- Forces the bottom threads of the fastener against the top threads of the bolt
- Also referred to as Nylon Lock Nuts, Nyloc Nuts, Polymer-Insert Lock Nuts, or Elastic Stop Nuts
- UNC and UNF sizes available
- Locks the nut into place so it will not vibrate loose
- Retain locking ability up to 250 °F (121 °C)
- Case Hardened CR+3 Zinc Plated Steel
- REACH and RoHS Compliant
|
Nylon Insert
Lock Nut Size |
Width Across Flats | Height / Thickness |
| #2 | 3/16" | 9/64" |
| #3 | 3/16" | 9/64" |
| #4 | 1/4" | 9/64" |
| #6 | 5/16" | 11/64" |
|
#8
|
11/32" | 15/64" |
| #10 | 3/8" | 15/64" |
| #12 | 7/16" | 5/16" |
See Product Specifications
NA = "Not Sold In Single Quantity"
Select Package Quantity
Loading ...
Product Specifications
Color
Silver
Drive Style
External Hex
Finish
Zinc Plated
Grade
A
Material
Steel
Product Type
Nylon Insert Lock Nut
Standards Met
REACH, RoHS
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
