Metric Thinwall Ribbed Low Profile Head Rivet Nut - Aluminium

Metric Thinwall Ribbed Low Profile Head Rivet Nut - Aluminium

Flanged Insert With An Aluminium Internal Threaded Nut


• Ribbed body helps prevent spinning
• For use in round holes
• Low profile head installs near flush
• Resistant to Atmospheric Corrosion
• Compatible with Spin-Spin or Spin-Pull tools

Rivet Nuts are used to install a threaded insert into a material where only one side is accessible. Installed “blind”, the Rivet Nut partially collapses upon installation to grip the material between the head and compressed body. Rivet Nuts are useful for securing permanent threads into materials otherwise too thin for tapped holes.  

Sizes listed as Diameter - Thread Count x Length


SKU Thread Size Grip Range Length Installed Length Head Diameter Head Height (Nominal) Body Dia Max Hole Size
1600-016-002 M6-1.0 0.7-4.2 14.73 0.38 12.7 0.76 9.91 10
1600-016-004 M8-1.25 0.7-3.8 17.53 11.94 17.4 0.89 13.46 13.5
1600-016-006 M5-0.8 0.5-3.3 12.07 8 10.5 0.76 7.52 7.6
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
M6-1.0 x 14.73
(0.7 - 4.2 Grip)
M6-1.0 x 14.73
(0.7 - 4.2 Grip)
1 $0.31 (0.31/ea)
100 $27.00 (0.27/ea)
1000 $240.00 (0.24/ea)
Subtotal: $0.00 /
M8-1.25 x 17.53
(0.7 - 3.8 Grip)
M8-1.25 x 17.53
(0.7 - 3.8 Grip)
1 $0.47 (0.47/ea)
100 $40.00 (0.4/ea)
1000 $360.00 (0.36/ea)
Subtotal: $0.00 /
M5-0.8 x 12.07
(0.5 - 3.3 Grip)
M5-0.8 x 12.07
(0.5 - 3.3 Grip)
1 $0.25 (0.25/ea)
100 $16.00 (0.16/ea)
1000 $140.00 (0.14/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Head Style
Low Profile
Material
Aluminum
Product Type
Rivet Nut
Standards Met
ROHS Compliant
System of Measurement (Unit)
Metric
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances