Metric Hex Cap Screws, Zinc Plated Steel, Partial Thread, M6 x 1.0 x 40M
Diameter - Thread Pitch: M6-1.00
Quantity | Unit price |
---|---|
To 99 |
$0.20*
|
To 999 |
$0.17*
|
From 1000 |
$0.15*
|
- Across Flats (Width): 10mm (Max 10.00mm - Min 9.78mm)
- Additional Sizing Info: FT = Full Thread, PT = Partial Thread
- Color: Silver
- Condition: New
- Diameter: M6
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Fit: 6g
- FT = Full Thread: No
- Grade: 10.9 (Grade 8 Metric Equivalent)
- Head Height Basic: 4 mm
- Head Height Max: Max 4.15 - Min 3.85
- Head Style: Hex
- Length: 40M
- Material: Steel
- Overall Head Height: Max 4.15 - Min 3.85
- Part Number: 720572199222
- Product Type: Metric Hex Cap Screw
- Size System: US
- Size Type: Regular
- System of Measurement: Metric
- Thread Direction: Right Hand
- Thread Pitch: 1.00 mm
- Thread Size: M6
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 10mm
- M6-1.00
- Metric hex head is designed to be driven by a socket or wrench
- Also referred to as metric tap bolts or hex bolts
- A metric tap bolt has a smaller head than a standard hex head bolt
- Zinc plated steel is corrosion resistant
- DIN 930-933/ISO 4014-4017 compliant
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
FT = Full Thread
PT = Partial Thread
Product number:
1078-006-0002