Metric Hex Cap Screws, Stainless Steel A2 (18-8), Full Thread, M5 x .80 x 8M
Diameter - Thread Pitch: M5-0.80
| Quantity | Unit price |
|---|---|
| To 99 |
$0.14*
|
| To 999 |
$0.10*
|
| From 1000 |
$0.08*
|
- Across Flats (Width): 8mm (Max 8.00mm - Min 7.78mm)
- asme: B18.2.3.1M
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: M5
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 6g
- FT = Full Thread: Yes
- Grade: A2
- Head Height Basic: 3.5 mm
- Head Style: Hex
- Length: 8M
- Material: Stainless Steel
- Overall Head Height: Max 3.65 - Min 3.35
- Part Number: 661291502514
- Product Type: Metric Hex Cap Screws
- Size System: US
- Size Type: Regular
- Standards Met: ASME B18.2.3.1M, DIN 930-933, ISO 4014-4017
- System of Measurement: Metric
- Thread Direction: Right Hand
- Thread Pitch: 0.80 mm
- Thread Size: M5
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 8mm
- M5-0.80
- Metric hex head is designed to be driven by a socket or wrench
- Also referred to as metric tap bolts or hex bolts
- A metric tap bolt has a smaller head than a standard hex head bolt
- A2 Stainless steel metric hex cap screws are rust resistant
- DIN 930-933/ISO 4014-4017 compliant
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
Partially Threaded in Lengths 30mm and up
FT = Full ThreadPT = Partial Thread
Product number:
1077-002-0001