Metric Hex Cap Screws, Zinc Plated Steel, Full Thread, M12 x 1.75 x 30M
Diameter - Thread Pitch: M12-1.75
Quantity | Unit price |
---|---|
To 99 |
$0.57*
|
To 999 |
$0.51*
|
From 1000 |
$0.49*
|
- Across Flats (Width): 19mm (Max 19.00mm - Min 18.67mm)
- Additional Sizing Info: FT = Full Thread, PT = Partial Thread
- Color: Silver
- Condition: New
- Diameter: M12
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Fit: 6g
- FT = Full Thread: Yes
- Grade: 10.9 (Grade 8 Metric Equivalent)
- Head Height: Max 7.68 - Min 7.32
- Head Height Basic: 7.5 mm
- Head Style: Hex
- Length: 30M
- Material: Steel
- Part Number: 720572199772
- Product Type: Home > Hex Bolts Metric > Hex Cap Screws Metric > Zinc Plated Steel
- Size System: US
- Size Type: Regular
- System of Measurement: Metric
- Thread Direction: Right Hand
- Thread Pitch: 1.75 mm
- Thread Size: M12
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 19mm
- M12-1.75
- Metric hex head is designed to be driven by a socket or wrench
- Also referred to as metric tap bolts or hex bolts
- A metric tap bolt has a smaller head than a standard hex head bolt
- Zinc plated steel is corrosion resistant
- DIN 930-933/ISO 4014-4017 compliant
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
FT = Full Thread
PT = Partial Thread
Product number:
1078-012-0002