Carriage Bolts, Metric, Zinc Plated Steel, Class 4.6, DIN 603,  M12-1.75

Carriage Bolts, Metric, Zinc Plated Steel, Class 4.6, DIN 603, M12-1.75

Diameter - Thread Pitch: M12-1.75


  • Metric - DIN 603 Standards Specific
  • Class 4.6 Steel
  • CR+3 Zinc Plating
  • Dome head
  • Used mostly for wood to wood applications
  • Square section grips into the part being fixed (usually wood or other soft material)
  • Square section prevents the bolt from turning when the nut is tightened

M12-1.75 Metric Zinc plated steel carriage bolts have a domed or countersunk head, and the shank is topped by a short square section under the head.

REACH and RoHS Compliant

Sizes Listed As:
Diameter - Thread Pitch x Length from Underside of Head
FT = Full Thread
PT = Partial Thread

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
M12-1.75 x 30MM FT
M12-1.75 x 30MM FT
1 $1.11 (1.11/ea)
100 $104.00 (1.04/ea)
1000 $1,020.00 (1.02/ea)
Subtotal: $0.00 /
M12-1.75 x 40MM FT
M12-1.75 x 40MM FT
1 $1.32 (1.32/ea)
100 $124.00 (1.24/ea)
1000 $1,210.00 (1.21/ea)
Subtotal: $0.00 /
M12-1.75 x 50MM FT
M12-1.75 x 50MM FT
1 $1.48 (1.48/ea)
100 $137.00 (1.37/ea)
1000 $1,360.00 (1.36/ea)
Subtotal: $0.00 /
M12-1.75 x 60MM PT
M12-1.75 x 60MM PT
1 $1.66 (1.66/ea)
100 $153.00 (1.53/ea)
1000 $1,510.00 (1.51/ea)
Subtotal: $0.00 /
M12-1.75 x 80MM PT
M12-1.75 x 80MM PT
1 $2.41 (2.41/ea)
100 $223.00 (2.23/ea)
1000 $2,190.00 (2.19/ea)
Subtotal: $0.00 /
M12-1.75 x 100MM PT
M12-1.75 x 100MM PT
1 $2.44 (2.44/ea)
100 $210.00 (2.1/ea)
1000 $2,070.00 (2.07/ea)
Subtotal: $0.00 /

Frequently Used With

1 $0.24 (0.24/ea)
100 $18.00 (0.18/ea)
1000 $160.00 (0.16/ea)
Subtotal: $0.00
1 $0.56 (0.56/ea)
100 $38.00 (0.38/ea)
1000 $340.00 (0.34/ea)
Subtotal: $0.00
1 $0.21 (0.21/ea)
100 $14.00 (0.14/ea)
1000 $130.00 (0.13/ea)
Subtotal: $0.00

Product Specifications
Color
Silver
Finish
Zinc Plating
Head Style
Dome
Product Type
Carriage Bolts
System of Measurement (Unit)
Metric
Thread Direction
Right Hand
Thread Pitch (Count)
1.75 mm
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances