Hot Dip Galvanized Hex Nut
Finish Nuts in Hot Dip Galvanized Steel
- Standard Hex Finish Nut
- Hexagonal Shape Hex Nuts
- Smallest Size: 1/4"-20
- Largest Size: 3"-4
- Available in Fine (UNF) or Coarse (UNC) Thread
- Must be used with a HDG bolt or screw
- Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.
| Nut Size | Width Across Flats | Height |
| 1/4" | 7/16" | 7/32" |
| 5/16" | 1/2" | 17/64" |
| 3/8" | 9/16" | 21/64" |
| 7/16" | 11/16" | 3/8" |
| 1/2" | 3/4" | 7/16" |
| 9/16" | 7/8" | 31/64" |
| 5/8" | 15/16" | 35/64" |
| 3/4" | 1-1/8" | 41/64" |
| 7/8" | 1-5/16" | 3/4" |
| 1" | 1-1/2" | 55/64" |
See Product Specifications
NA = "Not Sold In Single Quantity"
Select Package Quantity
Loading ...
Product Specifications
Color
Gray
Corrosion Resistant
Yes
Drive Style
External Hex
Finish
Hot Dip Galvanized
Material
Steel
Product Type
Hex Finish Nut
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
