Hex Weld Nuts - 6 Projections With a Short Pilot

Plain Steel 6 Projection Short Pilot Weld Nuts

Hex Weld Nut in Plain Steel with 6 Projections & Short Pilot


  • Hexagonal Shape for High Torque Resistance
  • 6 Projections for Superior contact with the Weld Surface
  • Short Pilot for Precise Installation
  • Perfect for Restoration & Automotive Projects

Hex weld nuts are used for providing a threaded hole to materials too thin to tap as well as attaching a threaded hole to parts that can only be accessed from one side.

The 6 projections on weld nuts melt into the host material during welding providing superior contact with the weld surface while the short pilot helps to ensure a precise installation without slipping off the center during welding.


You May Also Like:

Welding Safety Equipment
Welding Equipment
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Hex Weld Nuts (6 Projections & Short Pilot) - 1/4"-20
SKU #8100-006-0002
Hex Weld Nuts (6 Projections & Short Pilot) - 1/4"-20
SKU #8100-006-0002
1
NA
25
$6.75 (0.27/ea)
100
$20.00 (0.2/ea)
1000
$170.00 (0.17/ea)
Subtotal: $0.00 /
Hex Weld Nuts (6 Projections & Short Pilot) - 5/16"-18
SKU #8100-006-0004
Hex Weld Nuts (6 Projections & Short Pilot) - 5/16"-18
SKU #8100-006-0004
1
NA
25
$7.25 (0.29/ea)
100
$22.00 (0.22/ea)
1000
$200.00 (0.2/ea)
Subtotal: $0.00 /
Hex Weld Nuts (6 Projections & Short Pilot) - 3/8"-16
SKU #8100-006-0006
Hex Weld Nuts (6 Projections & Short Pilot) - 3/8"-16
SKU #8100-006-0006
1
NA
25
$7.75 (0.31/ea)
100
$27.00 (0.27/ea)
1000
$240.00 (0.24/ea)
Subtotal: $0.00 /
Hex Weld Nuts (6 Projections & Short Pilot) - 7/16"-14
SKU #8100-006-0008
Hex Weld Nuts (6 Projections & Short Pilot) - 7/16"-14
SKU #8100-006-0008
1
NA
25
$10.25 (0.41/ea)
100
$31.00 (0.31/ea)
1000
$300.00 (0.3/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Finish
Plain
Material
Steel
Product Type
Hex Weld Nut
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances