Hex Weld Nuts - 3 Projections With a Short Pilot In Plain Steel

Plain Steel 3 Projection Short Pilot Weld Nuts

Hex Weld Nut in Plain Steel with 3 Projections & Short Pilot


  • Hexagonal Shape for High Torque Resistance
  • 3 Projections for Quick, Strong Welds
  • Short Pilot for Precise Installation
  • Perfect for Restoration & Automotive Projects
  • Made from Plain Steel

Hex weld nuts are used for providing a threaded hole to materials too thin to tap as well as attaching a threaded hole to parts that can only be accessed from one side.

The 3 projections on weld nuts melt into the host material during welding for a quick and enduring hold while the short pilot helps to ensure a precise installation without slipping off the center during welding.


You May Also Like:

Welding Safety Equipment
Welding Equipment
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Hex Weld Nuts (3 Projections & Short Pilot) - 1/4"-20
SKU #8100-002-0002
Hex Weld Nuts (3 Projections & Short Pilot) - 1/4"-20
SKU #8100-002-0002
1
$0.16 (0.16/ea)
100
$14.00 (0.14/ea)
1000
$120.00 (0.12/ea)
Subtotal: $0.00 /
Hex Weld Nuts (3 Projections & Short Pilot) - 5/16"-18
SKU #8100-002-0004
Hex Weld Nuts (3 Projections & Short Pilot) - 5/16"-18
SKU #8100-002-0004
1
$0.24 (0.24/ea)
100
$21.00 (0.21/ea)
1000
$180.00 (0.18/ea)
Subtotal: $0.00 /
Hex Weld Nuts (3 Projections & Short Pilot) - 3/8"-16
SKU #8100-002-0006
Hex Weld Nuts (3 Projections & Short Pilot) - 3/8"-16
SKU #8100-002-0006
1
$0.30 (0.3/ea)
100
$24.00 (0.24/ea)
1000
$230.00 (0.23/ea)
Subtotal: $0.00 /
Hex Weld Nuts (3 Projections & Short Pilot) - 7/16"-14
SKU #8100-002-0008
Hex Weld Nuts (3 Projections & Short Pilot) - 7/16"-14
SKU #8100-002-0008
1
$0.40 (0.4/ea)
100
$34.00 (0.34/ea)
1000
$300.00 (0.3/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Finish
Plain
Material
Steel
Product Type
Hex Weld Nut
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances