Hex Cap Screws, Grade 2 Zinc Plated Steel, 3/4"-16 x 2", Full Thread
Diameter - Thread Pitch: 3/4" - 16
| Quantity | Unit price |
|---|---|
| To 99 |
$2.76*
|
| To 999 |
$2.53*
|
| From 1000 |
$2.50*
|
- Across Flats (Width): 1-1/8" (Max 1.125 - Min 1.100)
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 3/4"
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Fine
- Finish: Zinc Plated
- Fit: 2A
- FT = Full Thread: Yes
- Grade: 2
- Head Height: Max 0.483 - Min 0.455
- Head Height Basic: 15/32"
- Head Height Max: 0.483
- Head Style: Hex
- Length: 2"
- Material: Alloy Steel
- Part Number: 720572127454
- Product Type: Hex Cap Screw
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 16 Per Inch
- Thread Size: 3/4"-16
- Thread Standard: UNF
- Thread Type: Fine
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Width Across Corners: Max 1.299 - Min 1.254
- Wrench Size: 1-1/8"
- 3/4"-16
- Hexagon head designed to be driven by a wrench or socket
- Also called hex cap bolts, hex bolts, tap bolts or hex cap screws
- Grade 2 Zinc plated steel hex cap screws have a layer of corrosion resistance
- Distinguished by having no hash marks on top of the bolt's head
- REACH and RoHS Compliant
A hex cap screw in smaller sizes may not have a shoulder. When a hex cap screw is fully threaded it can also be referred to as a tap bolt.
A Hex Bolt is measured as: Diameter x Thread Pitch x Length from Under Head
FT: Fully Threaded
PT: Partially Threaded
** 3/4"-16 Hex Cap Screws listed as PT, usually have a threaded portion of about 1-3/4".
However, this can vary slightly from manufacturer to manufacturer.
Product number:
1104-028-0002