Hex Cap Screws, Stainless Steel 18-8, 3/4"-10 x 1"
Diameter - Thread Pitch: 3/4" - 10
| Quantity | Unit price |
|---|---|
| To 99 |
$3.25*
|
| To 999 |
$2.89*
|
| From 1000 |
$2.45*
|
- Across Flats (Width): 1-1/8" (Max 1.125 - Min 1.100)
- asme: B18.2.1
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 3/4"
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 2A
- Grade: 18-8
- Head Height: Basic 15/32", Max 0.483 - Min 0.455
- Head Height Basic: 31/64"
- Head Height Max: 0.483
- Head Style: Hex
- Length: 1"
- Material: Stainless Steel
- Overall Head Height: 0.455" - 0.483"
- Part Number: 710500932366
- Product Type: Hex Cap Screws
- Size System: US
- Size Type: Regular
- Standards Met: ASME B18.2.1
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 10 Per Inch
- Thread Size: 3/4"-10
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Width Across Corners: Max 1.299 - Min 1.254
- Wrench Size: 1-1/8"
- 3/4"-10
- Hexagon head designed to be driven by a wrench or socket
- Also called hex cap bolts, hex bolts, tap bolts or hex cap screws
- 18-8 Stainless steel hex cap screws offer protection from weather and corrosive environments
- Rust resistant in freshwater environments
- For saltwater environments use the 316 stainless steel version
A hex cap screw in smaller sizes may not have a shoulder. When a hex cap screw is fully threaded it can also be referred to as a tap bolt.
Hex Bolts are measured as: Diameter x Thread Pitch x Length from Under Head
FT: Fully Threaded
PT: Partially Threaded
**1/4"-20 Hex Cap Screws listed as PT, usually have a threaded portion of about 3/4".
However, this can vary slightly from manufacturer to manufacturer.
Product number:
96002