Hex Cap Screws, Grade 5 Zinc Plated Steel, 1-1/2"-6 x 3", Full Thread
Diameter - Thread Pitch: 1-1/2" - 6
| Quantity | Unit price |
|---|---|
| To 99 |
$18.18*
|
| To 999 |
$16.32*
|
| From 1000 |
$14.36*
|
- Across Flats (Width): 2-1/4" (Max 2.25 - Min 2.19)
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 1/2"
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Fit: 2A
- FT = Full Thread: Yes
- Grade: 5
- Head Height: Max 0.9375 - Min 0.9020
- Head Height Basic: 15/16"
- Head Height Max: 0.9375
- Head Style: Hex
- Length: 3"
- Material: Alloy Steel
- Part Number: 722703767522
- Product Type: Hex Cap Screw
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 6 Per Inch
- Thread Size: 1-1/2"-6
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 2-1/4"
- 1-1/2"-6
- Hexagon head designed to be driven by a wrench or socket
- Also called hex cap bolts, hex bolts, tap bolts or hex cap screws
- Grade 5 Zinc plated steel hex cap screws have a layer of corrosion resistance
- Grade 5 Zinc hex cap screws are distinguished by three hash marks on top of the bolt's head
- REACH and RoHS Compliant
A hex cap screw in smaller sizes may not have a shoulder. When a hex cap screw is fully threaded it can also be referred to as a tap bolt.
A Hex Bolt is measured as: Diameter x Thread Pitch x Length from Under Head
FT: Fully Threaded
PT: Partially Threaded
** 1-1/2"-6 Hex Cap Screws listed as PT, usually have a threaded portion of about 3-1/4".
However, this can vary slightly from manufacturer to manufacturer.
Product number:
1102-052-0002