
Zinc Plated Flat Washers - USS Sizes
USS Sizes
- Zinc plated steel flat washers in USS are measured in Inch sizes
- USS sized washers are made if zinc plated 344 and 347 steel
- Zinc plated steel is corrosion resistant
- IFI Tolerances Apply
- Washer Thickness may very +/- depending on production run
- REACH and RoHS Compliant
Flat Washer Sizes | Inner Diameter (ID) | Outer Diameter (OD) | Washer Thickness |
3/16" | 0.250" | 0.56" | 0.064" |
1/4" | 0.312" | 0.734" | 0.069" |
5/16" | 0.375" | 0.875" | 0.086" |
3/8" | 0.438" | 1.00" | 0.086" |
7/16" | 0.500" | 1.25" | 0.086" |
1/2" | 0.562" | 1.375" | 0.112" |
9/16" | 0.625" | 1.469" | 0.112" |
5/8" | 0.688" | 1.75" | 0.136" |
3/4" | 0.812" | 2.00" | 0.148" |
7/8" | 0.938" | 2.25" | 0.164" |
1" | 1.062" | 2.50" | 0.164" |
1-1/8" | 1.250" | 2.75" | 0.164" |
1-1/4" | 1.375" | 3.00" | 0.164" |
1-3/8" | 1.500" | 3.25" | 0.183" |
1-1/2" | 1.625" | 3.50" | 0.183" |
1-5/8" | 1.750" | 3.75" | 0.183" |
1-3/4" | 1.875" | 4.00" | 0.183" |
2" | 2.125" | 4.50" | 0.183" |
2-1/4" | 2.375" | 4.75" | 0.221" |
2-1/2" | 2.625" | 5.00" | 0.245" |
3" | 3.125" | 5.50" | 0.288" |
See Product Specifications
NA = "Not Sold In Single Quantity"
Select Package Quantity
Loading ...
Product Specifications
Finish
Zinc Plated
Material
Steel
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances