Stainless Steel Fender Washers
304 Stainless Steel Large OD Flat Washers
- Prevent pull-through
- Allow for distribution of weight over greater area than with normal washers
- Can be used where rust has made a hole larger
- Used on materials that are softer such as sheet metal
- 304 Stainless Steel fender washers are durable, corrosion resistant and long lasting
- Actual measurements may vary slightly +/- depending on production run
304 Stainless Steel Fender Washer Specifications
| Flat Washer Sizes | Inner Diameter (ID) | Outer Diameter (OD) | Washer Thickness |
| #6 x 5/8" | 0.149" | 5/8" | 0.031" |
| #8 x 3/4" | 0.174" | 3/4" | 0.040" |
| #10 x 11/16" | 0.203" | 11/16" | 0.040" |
| #10 x 3/4" | 0.203" | 3/4" | 0.040" |
| #10 x 1" | 0.203" | 1" | 0.040" |
| #10 x 1-1/4" | 0.203" | 1-1/4" | 0.040" |
| 1/4" x 11/16" | 0.281" | 11/16" | 0.050" |
| 1/4" x 1" | 0.281" | 1" | 0.050" |
| 1/4" x 1-1/4" | 0.281" | 1-1/4" | 0.050" |
| 1/4" x 1-1/2" | 0.281" | 1-1/2" | 0.050" |
| 1/4" x 2" | 0.281" | 2" | 0.062" |
| 5/16" x 1" | 0.343" | 1" | 0.050" |
| 5/16" x 1-1/4" | 0.343" | 1-1/4" | 0.050" |
| 5/16" x 1-1/2" | 0.343" | 1-1/2" | 0.062" |
| 5/16" x 2" | 0.343" | 2" | 0.062" |
| 3/8" x 1" | 0.406" | 1" | 0.050" |
| 3/8" x 1-1/4" | 0.406" | 1-1/4" | 0.050" |
| 3/8" x 1-1/2" | 0.406" | 1-1/2" | 0.050" |
| 3/8" x 2" | 0.406" | 2" | 0.062" |
| 1/2" x 1-1/2" | 0.531" | 1-1/2" | 0.062" |
| 1/2" x 1-3/8" | 0.531" | 1-3/8" | 0.062" |
| 1/2" x 2" | 0.531" | 2" | 0.062" |
See Product Specifications
NA = "Not Sold In Single Quantity"
Select Package Quantity
Loading ...
Product Specifications
Color
Silver
Corrosion Resistant
Yes
Grade
304
Material
Stainless Steel
Product Type
Fender Washer
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
