Button Flange Head Socket Cap Screws - 304 Stainless Steel
Screw Diameter - Thread Pitch: #8-32
Button Head Socket Cap Screws are bolts or machine screws with a Hex or Allen drive style. Button Head Socket Cap Screws have a clean and unstamped domed head with a flat bottom that protrudes above the installation surface for a nice finished look. A Button Socket Cap Screw, also known as a Button Socket Head Cap Screw, Socket Screw or Allen Button Socket Bolt, is a type of cap screw with a cylindrical head and hexagonal drive hole. Button Flange Socket Head Screws feature a built in washer, which creates a large flange to keep the screw head from crushing thin or soft materials.
Button Flange Head Socket Cap Screws are fully threaded and have a Class 3A thread fit. Head height is measured from the bottom of the flange to the top of the head. Screw length is measured from under the flange. Note: Button head screws are not recommended for high strength applications. 18-8 (304) Stainless Steel—Offers excellent corrosion resistance. May be mildly magnetic. Minimum Rockwell hardness is B70. Minimum tensile strength is 70,000 psi.
|
Product Specifications:
|
|
Button Flange Head Socket Cap Screws
|
Thread Diameter: (#8) Max 0.1631 - Min 0.1571
(Class 2A Fit, ANSI B1.1)
|
|
Thread Pitch: 32 Per Inch (Coarse)
|
|
Head Diameter with Flange: Max 0.350 - Min 0.300
|
|
Head Height: Max 0.090 - Min 0.078
|
|
Thread Direction: Right Hand
|
|
Material: 304 Stainless Steel
|
|
Allen Key / Hex Bit: 3/32"
|
Product Specifications may vary slightly +/- depending upon production run
within IFI Tolerances
|
Sizes Listed As:
Diameter - Thread Pitch x Length from Underside of Head
