Brass Wing Nuts
Manually Installed Nuts in Brass
- Made for projects that don't require tools
- Install with just your fingers
- Two protruding "wings"
- Can be referred to as either a Wingnut or Wing Nut
- Commonly used where frequent adjustments is required
- Sized listed below as: Internal Diameter - Thread Pitch
| Nut Sizes | Wing Span | Thickness |
| #6 | 0.72/0.59" | 0.125" |
| #8 | 0.91/0.78" | 0.171" |
| #10 | 0.91/0.78" | 0.171" |
| #12 | 0.91/0.78" | 0.171" |
| 1/4" | 1.10/0.97" | 0.187" |
| 5/16" | 1.25/1.12" | 0.238" |
| 3/8" | 1.49/1.31" | 0.250" |
| 1/2" | 1.94/1.81" | 0.350" |
See Product Specifications
NA = "Not Sold In Single Quantity"
Select Package Quantity
Loading ...
Product Specifications
Color
Yellow
Color May Vary
Color and sheen may vary
Corrosion Resistant
Yes
Drive Style
Hand
Material
Brass
Product Type
Wing Nut
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
