Aluminum Rivet Backup Washers
Aluminum Alloy
- Typically used in soft metals
- Create a larger diameter of pressure during fastener installation
- The larger diameter helps to spead our pressure over the material preventing pull through
- Always use the same material for rivet and backup washer
- Actual measurements may vary slightly +/- depending on production run
Aluminum Rivet Backup Washer Size Chart
| Washer Size |
Rivet Diameter
(Callout) |
Rivet Diameter
(Inch) |
| 1/8" | 4 | 1/8" |
| 5/32" | 5 | 5/32" |
| 3/16" | 6 | 3/16" |
| 1/4" | 8 | 1/4" |
Aluminum Rivet Backup Washer Specifications
| Washer Sizes | Inner Diameter (ID) | Outer Diameter (OD) | Washer Thickness |
| 1/8" | Max 0.136" - Min 0.132" | 0.375" | 0.062" |
| 5/32" | Max 0.167" - Min 0.163" | 0.437" | 0.062" |
| 3/16" | Max 0.199" - Min 0.195" | 0.500" | 0.062" |
| 1/4" | Max 0.264" - Min 0.260" | 0.562" | 0.062" |
See Product Specifications
NA = "Not Sold In Single Quantity"
Select Package Quantity
Loading ...
Product Specifications
Color
Silver
Material
Aluminum
Product Type
Rivet Backup Washer
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
