Roofing Screws, Phillips Wafer Head, Sharp Point, Zinc Plated Steel, Unpainted, #8 x 9/16"
Unpainted Zinc Plated Sharp Point Screw
| Quantity | Unit price |
|---|---|
| To 99 |
$0.08*
|
| To 999 |
$0.06*
|
| From 1000 |
$0.04*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: #8
- Drive Style: Phillips
- Head Type: Wafer Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Head Style: Wafer
- Length: 9/16"
- Material (Duplicate): Carbon Steel
- Material: Carbon Steel
- Part Number: 3661124132601
- Pattern: Roofing Screws
- Point Type: Sharp
- Product Type: Roofing Screws
- Size: #8 x 9/16"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 8 Per Inch
- Thread Size: #8
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 0.03
#8 Zinc Plated Phillips Wafer Head Sharp Point Screw - Versatile Fastener for Metal to Metal and Metal to Wood Applications
- Zinc plated for corrosion resistance
- Low-profile wafer head sits flush against surface
- Sharp point eliminates the need for pilot holes or pre-drilling
- Phillips drive provides good torque transfer and cam-out resistance
- Ideal for attaching metal lath, sheet metal, and other light gauge metal applications
- You can also use it for fastening metal to wood.
- Easy installation with common hand tools or power tools
The #8 zinc plated Phillips wafer head sharp point screws are versatile. You can use them to fasten metal to metal or metal to wood in a variety of applications. These screws also go by the names wafer head sheet metal screws or wafer head k-lath metal piercing screws. They also go by the names wafer head sheet metal screws or wafer head k-lath metal piercing screws.
A flat wafer head is a design of screw head that is flat and wide, resembling a wafer cookie. This design enables the screw head to sit flush against the surface once you fully drive it in. Flat wafer heads are great for when you want a screw that has a low-profile head, giving a tidy look. People commonly use them in tight spaces where a raised screw head may not be suitable.
The #8 zinc plated Phillips wafer head sharp point screw has a pointed tip. This tip can pierce materials without needing pilot holes or pre-drilling. This design makes installation quicker and easier, especially when working with metal to metal or metal to wood applications. The sharp point screw provides efficient penetration and secure attachment, making it a versatile fastening solution for various projects.
The Phillips drive is a type of screw drive characterized by a cross-shaped slot in the screw head. The design provides good torque transfer and resistance to cam-out, which occurs when the screwdriver slips out of the screw head. People commonly use the Phillips drive for fastening because it effectively transfers torque. It also helps prevent the screwdriver from slipping during installation.
People often use these screws to attach thin metal sheets or metal studs up to 20 gauge in thickness.
Zinc coating, or zinc plating, adds a thin layer of zinc to a metal surface to prevent rust. The zinc plating protects the #8 Phillips modified truss wafer sharp point screws from rust and corrosion. You can use them to fasten metal to metal and metal to wood in various applications. The zinc coating on screws corrodes first, protecting the metal underneath and making the screws last longer.
These #8 Phillips wafer head self drilling screws can fasten metal to metal or wood studs. They have a modified truss design and sharp points for easy attachment. The zinc plating provides corrosion resistance, making them suitable for use in dry interior environments.
Available Sizes:
- #8 x 9/16" Phillips Wafer Head Sharp Point Screw, Zinc Plated
- #8 x 3/4" Phillips Wafer Head Sharp Point Screw, Zinc Plated
- #8 x 1" Phillips Wafer Head Sharp Point Screw, Zinc Plated
- #8 x 1-1/4" Phillips Wafer Head Sharp Point Screw, Zinc Plated
- #8 x 1-7/8" Phillips Wafer Head Sharp Point Screw, Zinc Plated
Our #8 zinc plated Phillips wafer head sharp point screws are ideal for fastening metal to wood studs. They are also perfect for working with metal lath and sheet metal. These screws are metal piercing. These metal piercing screws are capable of penetrating steel studs or metal lath to wood studs.
Utilized to attach metal to wood or metal to metal with an easy installation process. Choose from our selection of sizes to find the perfect fit for your project needs.