Sheet Metal Screws, Square Drive Pan Head, Self Driller TEK 2, Zinc Plated Steel, #8 x 3/4"
Diameter - Thread Pitch: #8-18
| Quantity | Unit price |
|---|---|
| To 99 |
$0.08*
|
| To 999 |
$0.04*
|
| From 1000 |
$0.03*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: #8
- Drive Style: Internal Square
- Elongation: 30%
- Head Type: Pan Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Head Diameter: Max 0.322 - Min 0.306
- Head Style: Pan
- Length: 3/4"
- Material (Duplicate): Zinc Plated Steel
- Material: Steel
- Overall Head Height: Max 0.096 - Min 0.085
- Point Type: TEK-2 (0.211)
- Product Type: Square Drive Pan Head Self Drilling Screw
- Size System: US
- Size Type: Regular
- Square Drive: #2
- System of Measurement: Inch
- TEK Self Drilling Point: TEK 2
- Tensile PSI: 180,000 PSI Heat Treated
- Thread Diameter Major: #8 (0.166)
- Thread Diameter Minor: #8 (0.122)
- Thread Direction: Right Hand
- Thread Pitch: 8 Per Inch
- Thread Size: #8
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- #8-18
- Self drilling point to pierce 20 through 14 gauge metals
- The square drive style provide better hold making them less likely to strip
- Commonly used in exterior elements
- Zinc plated steel square drive pan head self drilling screws offer durability at a low price
- Sizes listed below as: Diameter - Thread Pitch
Product number:
1003-006-0022