#8-18 Square Drive Pan Head Self Driller 410 Stainless Steel Screws

#8-18 Stainless Steel Square Drive Pan Head Self Drilling Screws

Diameter - Thread Pitch: #8-18


  • #8-18
  • Self drilling point to pierce 20 through 14 gauge metals
  • The square drive style provide better hold making them less likely to strip
  • Commonly used in exterior elements
  • 410 Stainless steel square drive pan head self drilling screws are hardened and corrosion resistant
  • Sizes listed below as: Diameter - Thread Pitch
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#8-18 x 3/8"
#8-18 x 3/8"
1 $0.09 (0.09/ea)
100 $7.00 (0.07/ea)
1000 $60.00 (0.06/ea)
Subtotal: $0.00 /
#8-18 x 1/2"
#8-18 x 1/2"
1 $0.09 (0.09/ea)
100 $7.00 (0.07/ea)
1000 $60.00 (0.06/ea)
Subtotal: $0.00 /
#8-18 x 5/8"
#8-18 x 5/8"
1 $0.13 (0.13/ea)
100 $11.00 (0.11/ea)
1000 $90.00 (0.09/ea)
Subtotal: $0.00 /
#8-18 x 3/4"
#8-18 x 3/4"
1 $0.09 (0.09/ea)
100 $7.00 (0.07/ea)
1000 $60.00 (0.06/ea)
Subtotal: $0.00 /
#8-18 x 1"
#8-18 x 1"
1 $0.13 (0.13/ea)
100 $11.00 (0.11/ea)
1000 $90.00 (0.09/ea)
Subtotal: $0.00 /
#8-18 x 1-1/4"
#8-18 x 1-1/4"
1 $0.13 (0.13/ea)
100 $11.00 (0.11/ea)
1000 $90.00 (0.09/ea)
Subtotal: $0.00 /
#8-18 x 1-1/2"
#8-18 x 1-1/2"
1 $0.20 (0.2/ea)
100 $17.00 (0.17/ea)
1000 $150.00 (0.15/ea)
Subtotal: $0.00 /
#8-18 x 2"
#8-18 x 2"
1 $0.24 (0.24/ea)
100 $20.00 (0.2/ea)
1000 $180.00 (0.18/ea)
Subtotal: $0.00 /

Frequently Used With

1 $1.05 (1.05/ea)
10 $8.60 (0.86/ea)
50 $38.50 (0.77/ea)
Subtotal: $0.00
1 $4.84 (4.84/ea)
10 $43.20 (4.32/ea)
50 $194.50 (3.89/ea)
Subtotal: $0.00
1 $0.11 (0.11/ea)
100 $6.00 (0.06/ea)
1000 $50.00 (0.05/ea)
Subtotal: $0.00

Product Specifications
Color
Silver
Corrosion Resistant
Yes
Drive Style
Internal Square
Grade
410
Hardness
40 Rockwell C
Head Diameter
Max 0.322 - Min 0.306
Head Style
Pan
Material
Stainless Steel
Overall Head Height
Max 0.096 - Min 0.085
Point Type
TEK-3 (0.353)
Product Type
Square Drive Pan Head Self Drilling Screw
Square Drive
#2
System of Measurement (Unit)
Inch
TEK Self Drilling Point
TEK-3
Tensile PSI
180,000 PSI Heat Treated
Thread Diameter Major
#8 (0.166)
Thread Diameter Minor
#8 (0.122)
Thread Direction
Right Hand
Thread Pitch (Count)
18 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances