Sheet Metal Screws, Phillips Oval Head, Stainless Steel 316, #8 x 1/2"
Diameter - Thread Pitch: #8-15
| Quantity | Unit price |
|---|---|
| To 99 |
$0.15*
|
| To 999 |
$0.09*
|
| From 1000 |
$0.08*
|
- ANSI: ANSI B18.6.3
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: #8
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Oval Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Grade: 316
- Hardness: 100 Rockwell B
- Head Height Max: 0.152
- Head Diameter: Max 0.332 - Min 0.292
- Head Style: Oval
- Length: 1/2"
- Marine Grade: Yes
- Material: Stainless Steel
- Overall Head Height: Max 0.152 - Min 0.126
- Phillips Drive: #2
- Point Type: A
- Product Type: Sheet Metal Screws
- Reduction: 0.4
- Standards Met: ANSI B18.6.3
- System of Measurement: Inch
- Thread Diameter Major: (#8) 0.168 - 0.162
- Thread Diameter Minor: (#8) 0.123 - 0.116
- Thread Direction: Right Hand
- Thread Pitch: 15 Per Inch
- Thread Size: #8-15
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Yield PSI: 55,000 - 75,000 PSI
- #8-15
- Raised decorative head
- Notched at the tip to aid in chip removal
- Threads cut into material for a stronger hold
- 316 Stainless steel Phillips oval head sheet metal screws are highkly rust resistant
- 316 stainless steel is great for salt water environments
- Sizes listed below as: Diameter - Thread Pitch
Product number:
6010-006-002