#8-18 Zinc Plated Phillips Flat Head Self Drilling Screws

#8-18 Zinc Plated Steel Phillips Flat Head Self Drilling Screws

Diameter - Thread Pitch: #8-18


  • #8-18
  • CR+3 Zinc to easily drill into materials
  • Countersunk head that runs flush with the installation surface
  • #2 Self drilling (TEK) point
  • Zinc plated phillips flat head self drilling screws are hardened to make drilling easy
  • NOTE: Sheet metal screws provide excellent retention in wood but can be difficult to remove
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Zinc Plated Phillips Flat Head Self Drilling Screws - #8-18 x 3/4"
SKU #1070-100-0002
Zinc Plated Phillips Flat Head Self Drilling Screws - #8-18 x 3/4"
SKU #1070-100-0002
1
NA
25
$3.25 (0.13/ea)
100
$8.00 (0.08/ea)
1000
$30.00 (0.03/ea)
Subtotal: $0.00 /
Zinc Plated Phillips Flat Head Self Drilling Screws - #8-18 x 1"
SKU #1070-100-0012
Zinc Plated Phillips Flat Head Self Drilling Screws - #8-18 x 1"
SKU #1070-100-0012
1
NA
25
$3.75 (0.15/ea)
100
$9.00 (0.09/ea)
1000
$70.00 (0.07/ea)
Subtotal: $0.00 /
Zinc Plated Phillips Flat Head Self Drilling Screws - #8-18 x 1-1/4"
SKU #1070-100-0022
Zinc Plated Phillips Flat Head Self Drilling Screws - #8-18 x 1-1/4"
SKU #1070-100-0022
1
NA
25
$4.25 (0.17/ea)
100
$10.00 (0.1/ea)
1000
$80.00 (0.08/ea)
Subtotal: $0.00 /
Zinc Plated Phillips Flat Head Self Drilling Screws - #8-18 x 1-1/2"
SKU #1070-100-0032
Zinc Plated Phillips Flat Head Self Drilling Screws - #8-18 x 1-1/2"
SKU #1070-100-0032
1
NA
25
$4.25 (0.17/ea)
100
$10.00 (0.1/ea)
1000
$80.00 (0.08/ea)
Subtotal: $0.00 /
Zinc Plated Phillips Flat Head Self Drilling Screws #8-18 x 2"
SKU #1070-100-0042
Zinc Plated Phillips Flat Head Self Drilling Screws #8-18 x 2"
SKU #1070-100-0042
1
NA
25
$4.25 (0.17/ea)
100
$10.00 (0.1/ea)
1000
$80.00 (0.08/ea)
Subtotal: $0.00 /

Product Specifications
Color
Silver
Diameter
#8
Drive Style
Phillips
Head Style
Flat
Material
Zinc Plated Steel
Phillips Drive
#2
Point Type
TEK
Product Type
Self Drilling Screws
System of Measurement (Unit)
Inch
TEK Self Drilling Point
TEK 2
Thread Direction
Right Hand
Thread Pitch (Count)
18 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances