7/8"-9 Zinc Plated Wedge Anchors

7/8"-9 Zinc Plated Wedge Anchors

Diameter - Pitch: 7/8"-9


7/8"-9 (Grade 5) Zinc plated steel Wedge Anchors are used to secure or anchor materials and equipment to masonry surfaces.

  • Used to anchor equipment to masonry materials such as concrete
  • Installed into pre-drilled holes
  • Non-threaded end is inserted into the whole then struck to expand
  • The nut is then tightened against the washer to the installation material
  • Corrosion resistant
  • Not recommended for exterior use
REACH and RoHS Compliant

Select Products Below
See Product Specifications
Size:
Qty
Size
Select Package Quantity
SubTotal
Loading ...
Product Specifications
Across Flats (Width)
1-15/16" (Max 1.321 - Min 1.285)
Additional Sizing Info
Wedge Anchors
Body Diameter
7/8", Max 0.875 - Min 0.865
Color
Silver
Drill (Hole) Size
7/8"
Drive Style
External Hex
Finish
Zinc Plated
Grade
5
Head Style
No Head
Material
Steel
Other
Listed As: Diameter - Thread Pitch x Length from Tip to Tip
Product Type
Wedge Anchors
Standards Met
REACH and RoHS Compliant
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
9 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
1-15/16"