Print this page
Hex Tap Bolts 18-8 Stainless Steel 7/8-9"

7/8"-9 Stainless Steel Hex Tap Bolts

Diameter - Thread Pitch: 7/8" - 9 | 18-8 SS

  • 7/8"-9
  • Hexagon head designed to be driven by a wrench or socket
  • A Tap bolt is always full threaded regardless of length
  • Also referred to as a hex bolt
  • 18-8 Stainless steel tap screws offer protection from weather and corrosive environments
  • Rust resistant in freshwater environments
  • For saltwater environments use the 316 stainless steel version

A Hex Bolt is measured as: Diameter x Thread Pitch x Length from Under Head

Select Products Below See Product Specifications
NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
7/8"-9 x 1-1/2"
SKU #11200002
7/8"-9 x 1-1/2"
SKU #11200002
1 $5.20 (5.2/ea)
100 $429.00 (4.29/ea)
1000 $3,900.00 (3.9/ea)
Subtotal: $0.00 /
7/8"-9 x 1-3/4"
SKU #11200012
7/8"-9 x 1-3/4"
SKU #11200012
1 $3.60 (3.6/ea)
100 $297.00 (2.97/ea)
1000 $2,700.00 (2.7/ea)
Subtotal: $0.00 /
7/8"-9 x 2"
SKU #11200022
7/8"-9 x 2"
SKU #11200022
1 $3.96 (3.96/ea)
100 $327.00 (3.27/ea)
1000 $2,970.00 (2.97/ea)
Subtotal: $0.00 /
7/8"-9 x 2-1/4"
SKU #11200032
7/8"-9 x 2-1/4"
SKU #11200032
1 $3.80 (3.8/ea)
100 $314.00 (3.14/ea)
1000 $2,850.00 (2.85/ea)
Subtotal: $0.00 /
7/8"-9 x 2-1/2"
SKU #11200042
7/8"-9 x 2-1/2"
SKU #11200042
1 $4.17 (4.17/ea)
100 $344.00 (3.44/ea)
1000 $3,130.00 (3.13/ea)
Subtotal: $0.00 /
7/8"-9 x 2-3/4"
SKU #11200052
7/8"-9 x 2-3/4"
SKU #11200052
1 $5.04 (5.04/ea)
100 $416.00 (4.16/ea)
1000 $3,780.00 (3.78/ea)
Subtotal: $0.00 /
7/8"-9 x 3"
SKU #11200062
7/8"-9 x 3"
SKU #11200062
1 $7.12 (7.12/ea)
100 $587.00 (5.87/ea)
1000 $5,330.00 (5.33/ea)
Subtotal: $0.00 /
7/8"-9 x 3-1/4"
SKU #11200072
7/8"-9 x 3-1/4"
SKU #11200072
1 $6.24 (6.24/ea)
100 $515.00 (5.15/ea)
1000 $4,680.00 (4.68/ea)
Subtotal: $0.00 /
7/8"-9 x 3-1/2"
SKU #11200082
7/8"-9 x 3-1/2"
SKU #11200082
1 $8.20 (8.2/ea)
100 $677.00 (6.77/ea)
1000 $6,150.00 (6.15/ea)
Subtotal: $0.00 /
7/8"-9 x 3-3/4"
SKU #11200092
7/8"-9 x 3-3/4"
SKU #11200092
1 $9.28 (9.28/ea)
100 $766.00 (7.66/ea)
1000 $6,960.00 (6.96/ea)
Subtotal: $0.00 /
7/8"-9 x 4"
SKU #11200102
7/8"-9 x 4"
SKU #11200102
1 $8.58 (8.58/ea)
100 $708.00 (7.08/ea)
1000 $6,430.00 (6.43/ea)
Subtotal: $0.00 /
7/8"-9 x 5"
SKU #11200112
7/8"-9 x 5"
SKU #11200112
1 $10.76 (10.76/ea)
100 $888.00 (8.88/ea)
1000 $8,070.00 (8.07/ea)
Subtotal: $0.00 /
7/8"-9 x 6"
SKU #11200122
7/8"-9 x 6"
SKU #11200122
1 $12.09 (12.09/ea)
100 $997.00 (9.97/ea)
1000 $9,070.00 (9.07/ea)
Subtotal: $0.00 /

Frequently Used With

Hex Finish Nuts 304 SS - 7/8"-9 (1-5/16" Flats x 3/4" Thick)
Hex Finish Nuts 304 SS - 7/8"-9 (1-5/16" Flats x 3/4" Thick) 123142
Hex Finish Nuts 304 SS - 7/8
1 $2.37 (2.37/ea)
100 $192.00 (1.92/ea)
1000 $1,600.00 (1.6/ea)
Subtotal: $0.00
Flat Washers 304 SS - 7/8" (.937 ID x 2 OD x .109 Thick)
Flat Washers 304 SS - 7/8" (.937 ID x 2 OD x .109 Thick) 1000-105222
Flat Washers 304 SS - 7/8
1 $1.15 (1.15/ea)
100 $81.00 (0.81/ea)
1000 $660.00 (0.66/ea)
Subtotal: $0.00
Lock Washer Split Ring 304 SS - 7/8" (.878 ID x 1.455 OD x .219 Thick)
Lock Washer Split Ring 304 SS - 7/8" (.878 ID x 1.455 OD x .219 Thick) 108172
Lock Washer Split Ring 304 SS - 7/8
1 $1.47 (1.47/ea)
100 $118.00 (1.18/ea)
1000 $1,040.00 (1.04/ea)
Subtotal: $0.00
Nylon Lock Nuts, Stainless Steel 304, 7/8-9 (1.252 Flats x .999 Height)
Nylon Lock Nuts, Stainless Steel 304, 7/8-9 (1.252 Flats x .999 Height) 128242
Nylon Lock Nuts, Stainless Steel 304, 7/8-9 (1.252 Flats x .999 Height)
1 $4.52 (4.52/ea)
100 $376.00 (3.76/ea)
1000 $3,390.00 (3.39/ea)
Subtotal: $0.00
MRO Solution 2400 - Marine Grade Anti-Seize Lubricant - 8 oz.
MRO Solution 2400 - Marine Grade Anti-Seize Lubricant - 8 oz. 1050-106
MRO Solution 2400 - Marine Grade Anti-Seize Lubricant - 8 oz.
Anti Seize MRO Solution 2400 - 8oz Prevent Fastener Galling & Locking Up with Anti-Seize Lubricants
Our Price: $18.11
Subtotal: $0.00
Product Specifications
Product Specifications
ANSI
B18.2.1
Color
Silver
Corrosion Resistant
Yes
Diameter
7/8"
Drive Style
External Hex
Elongation
30%
FT = Full Thread
Yes
Grade
18-8
Hardness
100 Rockwell B
Head Height Max
0.563
Head Style
Hex
Material
Stainless Steel
Overall Head Height
Max 0.563 - Min 0.531
Product Type
Hex Tap Bolts
Reduction
40%
Standards Met
ANSI B18.2.1
System of Measurement (Unit)
Inch
Tensile PSI
100,000 - 125,000
Thread Direction
Right Hand
Thread Pitch (Count)
9 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
1-15/16"
Yield PSI
55,000 - 75,000

Your item has been added to your wish list.

Login

Please login to your customer account to create or access your wish list.

Forgot Password?

If you don't have an account click here to register.

Tell a friend about Hex Tap Bolts 18-8 Stainless Steel 7/8-9"

Volume Pricing: Buy in volume, get a discount. The larger the pack, the lower the cost per piece. Visit the New Site Features Page for additional details.