#6-20 Stainless Steel Square Drive Pan Head Self Drilling Screws
Diameter - Thread Pitch: #6-20
- #6-20
- Self drilling point to pierce 20 through 14 gauge metals
- The square drive style provide better hold making them less likely to strip
- Commonly used in exterior elements
- 410 Stainless steel square drive pan head self drilling screws are hardened and corrosion resistant
- Sizes listed below as: Diameter - Thread Pitch
Product Specifications
Color
Silver
Corrosion Resistant
Yes
Drive Style
Square
Hardness
40 Rockwell C
Head Diameter
Max 0.270 - Min 0.256
Head Style
Pan
Material
410 Stainless Steel
Point Type
TEK-2 (0.211)
Product Type
Square Drive Pan Head Self Drilling Screw
Self Drilling
Yes
Square Drive
#2
TEK Self Drilling Point
TEK-2
Tensile PSI
180,000 PSI Heat Treated
Thread Direction
Right Hand
Thread Pitch (Count)
20 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Select Package Quantity
#6 x 3/8"
SKU #1010-010-0002
1
$0.15 (0.15/ea)
$0.15 (0.15/ea)
25
$2.00 (0.08/ea)
$2.00 (0.08/ea)
100
$7.00 (0.07/ea)
$7.00 (0.07/ea)
1000
$60.00 (0.06/ea)
$60.00 (0.06/ea)
#6 x 1/2"
SKU #1010-010-0012
1
$0.15 (0.15/ea)
$0.15 (0.15/ea)
25
$2.00 (0.08/ea)
$2.00 (0.08/ea)
100
$7.00 (0.07/ea)
$7.00 (0.07/ea)
1000
$60.00 (0.06/ea)
$60.00 (0.06/ea)
#6 x 3/4"
SKU #1010-010-0022
1
$0.15 (0.15/ea)
$0.15 (0.15/ea)
25
$2.25 (0.09/ea)
$2.25 (0.09/ea)
100
$8.00 (0.08/ea)
$8.00 (0.08/ea)
1000
$70.00 (0.07/ea)
$70.00 (0.07/ea)
#6 x 1"
SKU #1010-010-0032
1
$0.15 (0.15/ea)
$0.15 (0.15/ea)
25
$2.50 (0.10/ea)
$2.50 (0.10/ea)
100
$9.00 (0.09/ea)
$9.00 (0.09/ea)
1000
$80.00 (0.08/ea)
$80.00 (0.08/ea)
#6 x 1-1/2"
SKU #1010-010-0042
1
$0.18 (0.18/ea)
$0.18 (0.18/ea)
25
$4.25 (0.17/ea)
$4.25 (0.17/ea)
100
$15.00 (0.15/ea)
$15.00 (0.15/ea)
1000
$140.00 (0.14/ea)
$140.00 (0.14/ea)
