Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 2, Zinc Plated Steel, #6-20

Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 2, Zinc Plated Steel, #6-20

Diameter - Thread Pitch: #6-20


  • #6-20
  • CR+3 Zinc to easily drill into materials
  • Countersunk head that runs flush with the installation surface
  • #2 Self drilling (TEK) point
  • Zinc plated phillips flat head self drilling screws are hardened to make drilling easy
  • NOTE: Sheet metal screws provide excellent retention in wood but can be difficult to remove
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#6-20 x 3/8"
#6-20 x 3/8"
1 $0.06 (0.06/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00 /
#6-20 x 1/2"
#6-20 x 1/2"
1 $0.06 (0.06/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00 /
#6-20 x 3/4"
#6-20 x 3/4"
1 $0.06 (0.06/ea)
100 $8.00 (0.08/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /
#6-20 x 1"
#6-20 x 1"
1 $0.06 (0.06/ea)
100 $3.00 (0.03/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /
#6-20 x 1-1/4"
#6-20 x 1-1/4"
1 $0.06 (0.06/ea)
100 $5.00 (0.05/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /

Frequently Used With

1 $1.04 (1.04/ea)
10 $8.10 (0.81/ea)
50 $38.00 (0.76/ea)
Subtotal: $0.00

Product Specifications
Color
Silver
Diameter
#6
Drive Style
Phillips
Head Style
Flat
Material
Zinc Plated Steel
Phillips Drive
#2
Point Type
TEK
Product Type
Self Drilling Screws
System of Measurement (Unit)
Inch
TEK Self Drilling Point
TEK 2
Thread Direction
Right Hand
Thread Pitch (Count)
20 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances