Metric Machine Screws, Phillips Flat Head, Stainless Steel A2 (18-8), M5 x .8

Metric Machine Screws, Phillips Flat Head, Stainless Steel A2 (18-8), M5 x .8

Diameter - Thread Pitch: M5-0.80


  • Used with nuts or driven into pre-drilled holes
  • A machine screw is commonly identified by its small size
  • 90-Degree countersunk head
  • Flat head runs flush with the surface of the installation material
  • A2 Stainless steel is the metric industry standard stainless steel
  • Designed for long lasting, exterior applications due to their corrosion resistance and durability

M5-0.80 Metric Phillips flat head machine screws in A2 Stainless Steel.
Sizes listed as: Diameter - Thread Pitch x Length from Top of Head

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
M5-0.80 x 10M
M5-0.80 x 10M
1 $0.18 (0.18/ea)
100 $10.00 (0.1/ea)
1000 $90.00 (0.09/ea)
Subtotal: $0.00 /
M5-0.80 x 12M
M5-0.80 x 12M
1 $0.18 (0.18/ea)
100 $10.00 (0.1/ea)
1000 $90.00 (0.09/ea)
Subtotal: $0.00 /
M5-0.80 x 16M
M5-0.80 x 16M
1 $0.19 (0.19/ea)
100 $10.00 (0.1/ea)
1000 $90.00 (0.09/ea)
Subtotal: $0.00 /
M5-0.80 x 20M
M5-0.80 x 20M
1 $0.19 (0.19/ea)
100 $11.00 (0.11/ea)
1000 $100.00 (0.1/ea)
Subtotal: $0.00 /
M5-0.80 x 25M
M5-0.80 x 25M
1 $0.22 (0.22/ea)
100 $13.00 (0.13/ea)
1000 $110.00 (0.11/ea)
Subtotal: $0.00 /
M5-0.80 x 30M
M5-0.80 x 30M
1 $0.27 (0.27/ea)
100 $17.00 (0.17/ea)
1000 $150.00 (0.15/ea)
Subtotal: $0.00 /
M5-0.80 x 80M
M5-0.80 x 80M
1 $0.44 (0.44/ea)
100 $36.00 (0.36/ea)
1000 $330.00 (0.33/ea)
Subtotal: $0.00 /

Frequently Used With

1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00
1 $0.07 (0.07/ea)
100 $2.00 (0.02/ea)
1000 $10.00 (0.01/ea)
Subtotal: $0.00
1 $1.04 (1.04/ea)
10 $8.10 (0.81/ea)
50 $38.00 (0.76/ea)
Subtotal: $0.00
1 $0.07 (0.07/ea)
100 $2.00 (0.02/ea)
1000 $10.00 (0.01/ea)
Subtotal: $0.00
1 $0.09 (0.09/ea)
100 $5.00 (0.05/ea)
1000 $40.00 (0.04/ea)
Subtotal: $0.00

Product Specifications
Corrosion Resistant
Yes
Drive Style
Phillips
Grade
A2
Head Diameter
Max 9.20 - Min 8.84
Head Style
Flat
Material
Stainless Steel
Overall Head Height
Max 2.50 (From Bottom of Undercut to Top of Head)
Phillips Drive
#2
Product Type
Metric Phillips Flat Head Machine Screws
System of Measurement (Unit)
Millimeter
Thread Direction
Right Hand
Thread Pitch (Count)
0.80 mm
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances