Threaded Inserts, Flush Hex Drive, Softwood, Yellow Zinc Alloy Steel, Type E, 5/16"-18 x 0.787
Hex Drive Threaded Inserts for Soft Wood
| Quantity | Unit price |
|---|---|
| To 99 |
$0.48*
|
| To 999 |
$0.47*
|
| From 1000 |
$0.46*
|
- Brand: E-Z Lok
- Color: Yellow/Silver
- Diameter: 5/16"
- Drill (Hole) Size: 7/16"
- Drive Style: Internal Hex (Allen)
- EZ Lok Drive Tool: 9100
- Thread Direction: Right Hand
- Thread Type: Coarse
- Head Style: No Head
- Internal Thread: 5/16/2018
- Length: 0.787
- Material: Zinc
- Product Type: Threaded Insert
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 18 Per Inch
- Thread Size: 5/16"-18
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Internal Thread Size: 5/16"-18
- Made from Die Cast Zinc
- Runs Flush with Installation Surface
- Hex Drive
- Intended for use in Soft Wood or Composites
Flush Hex Drive Threaded Inserts are installed the same way as any other threaded insert. They do not have a lip near the head, so they can be installed completely flush with the surface or even a little countersunk. Flush drive threaded inserts are generically referred to as Type E insert nuts.
Product number:
1060-432-002
Skip product gallery
E-Z Lok Hex Thread Insert Drive Tool, 5/16"-18 and M8 Inserts
$10.75*
Subscription
Frequently Used With
Size:
5/16"-18 M8
