Hex Tap Bolts, Grade 2 Zinc Plated Steel, 5/16"-18 x 2-1/2"
Diameter - Thread Pitch: 5/16" - 18
| Quantity | Unit price |
|---|---|
| To 99 |
$0.45*
|
| To 999 |
$0.30*
|
| From 1000 |
$0.26*
|
- Across Flats (Width): 1/2" (Max 0.500 - Min 0.489)
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: 5/16"
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Fit: 2A
- Grade: 2
- Head Height: Max 0.211 - Min 0.195
- Head Height Basic: 13/64"
- Head Height Max: 0.211
- Head Style: Hex
- Length: 2-1/2"
- Material: Steel
- Part Number: 720572198874
- Product Type: Hex Tap Bolts
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- Tensile PSI: 100,000 - 125,000
- Thread Direction: Right Hand
- Thread Pitch: 18 Per Inch
- Thread Size: 5/16"-18
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 1/2"
- 5/16"-18
- Tap bolts are fully threaded from the point to the underside of the hex head
- Also referred to as a hex bolt
- Hexagonal head designed to be driven by wrench or socket
- Grade 5 Zinc plated steel tap bolts have three distinguishing hash marks on the head
- Grade 5 zinc plating is case hardened and corrosion resistant
- They also come in a lighter silver color
A Hex Bolt is measured as: Diameter x Thread Pitch x Length from Under Head
Product number:
1104-0092-0002
Skip product gallery
Flat Washers, Zinc Plated Steel, USS, 5/16" (ID 0.375 x OD 0.875 x THK 0.086)
From
$0.03*
Subscription
Fender Washers, Zinc Plated Steel, 5/16" (ID 3/8" x OD 1-1/2")
From
$0.14*
Subscription
Lock Washers, Split Ring, Zinc Plated Steel, 5/16"(.314 ID x .583 OD x .078 THK)
From
$0.02*
Subscription
Frequently Used With
Size:
USS - 5/16"
Size x Outer Diameter:
5/16" x 1-1/2"
Size:
5/16"
