5/16-18 Stainless Steel Knurled Cup Point Socket Set Screws"

5/16"-18 Stainless Steel Knurled Cup Point Socket Set Screws

Knurled Cup Point Prevents Accidental Loosening


5/16"-18 Stainless Steel Knurled Cup Point Socket Set Screws are screws without a head designed to be driven by a hex (Allen) wrench. Set screws have no head which makes them the ideal choice for moving parts. Sitting flush in the installation, set screws allow machinery to have very close moving parts without the head of the fastener being exposed and causing damage. The knurled point on these fasteners acts as a locking mechanism to help prevent accidental loosening of the set screw due to vibration.

  • Knurled cup point to prevent accidental loosening due to vibration
  • Driven by hex wrench
  • Corrosion resistant in fresh water environments

*Note: Stainless steel has a high chance of galling (cold fusing) while being installed. To prevent this, we recommend using an MRO Anti-Seize Solution whenever installing stainless steel fasteners.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
5/16"-18 x 5/16" Stainless Steel Knurled Cup Point Socket Set Screws
SKU #2018-034-0002
5/16"-18 x 5/16" Stainless Steel Knurled Cup Point Socket Set Screws
SKU #2018-034-0002
1
$1.03 (1.03/ea)
100
$63.00 (0.63/ea)
1000
$560.00 (0.56/ea)
Subtotal: $0.00 /
5/16"-18 x 1/2" Stainless Steel Knurled Cup Point Socket Set Screws
SKU #2018-034-0012
5/16"-18 x 1/2" Stainless Steel Knurled Cup Point Socket Set Screws
SKU #2018-034-0012
1
$1.07 (1.07/ea)
100
$65.00 (0.65/ea)
1000
$580.00 (0.58/ea)
Subtotal: $0.00 /
5/16"-18 x 3/4" Stainless Steel Knurled Cup Point Socket Set Screws
SKU #2018-034-0022
5/16"-18 x 3/4" Stainless Steel Knurled Cup Point Socket Set Screws
SKU #2018-034-0022
1
$1.59 (1.59/ea)
100
$96.00 (0.96/ea)
1000
$850.00 (0.85/ea)
Subtotal: $0.00 /



FREQUENTLY USED WITH

1
$0.39 (0.39/ea)
100
$34.00 (0.34/ea)
1000
$270.00 (0.27/ea)
Subtotal: $0.00 /

Product Specifications
Additional Sizing Info
Full Thread
Color
Silver
Corrosion Resistant
Yes
Cup Point Diameter
Max 0.172 - Min 0.156
Diameter
5/16"
Drive Style
Internal Hex (Allen)
Grade
18-8
Head Style
No Head
Hex Drive
5/32"
Material
Stainless Steel
Point Degree
118
Point Type
Knurled Cup
Product Type
Socket Set Screws
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
18 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances