Carriage Bolts, Stainless Steel 316, 3/8"-16 x 3/4", Full Thread
Diameter - Thread Pitch: 3/8-16
| Quantity | Unit price |
|---|---|
| To 99 |
$1.15*
|
| To 999 |
$0.87*
|
| From 1000 |
$0.79*
|
- Color: Silver
- Corner Radius on Square: 0.047"
- Corrosion Resistant: Yes
- Diameter: 3/8"
- Head Type: Dome Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Filet Radius: 0.031
- Fit: 2A
- FT = Full Thread: Yes
- Grade: 316
- Head Height: Max 0.208 - Min 0.188
- Head Height Max: 0.208
- Head Diameter: Max 0.844 - Min 0.782
- Head Style: Dome
- Length: 3/4"
- Marine Grade: Yes
- Material: Stainless Steel
- Overall Head Height: Max 0.208 - Min 0.188
- Product Type: Carriage Bolt
- Square Neck Depth: Max 0.219 - Min 0.188
- Square Neck Width: Max 0.388 - Min 0.368
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 16 Per Inch
- Thread Size: 3/8"-16
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Square section grips into the part being fixed (typically wood)
- Carriage bolts are threaded all the way down to the square section beneath the head
- Prevents the bolt from turning when the nut is tightened
- 316 Stainless steel is corrosion and rust resistant
- 316 Stainless steel is considered the fastener industry standard
3/8"-16 Carriage bolts have a domed or countersunk head, and the shank is topped by a short square section under the head.
All Carriage Bolts over 6" in length are Partially Threaded
Diameter x Thread Pitch x Length from Under Head
FT: Fully Threaded
PT: Partially Threaded
Product number:
6006-008-002