
316 Stainless Steel Concealed Flange Joist Hangers
Stainless Steel Inverted Flange Joist Hangers for Decking Applications
- Used to help form the floor of decks
- Wrap around 3 sides of a joist
- Concealed flanges allow flush connections with ledge ends
- Provide cleaner lines for visible applications
- Height of joist hanger must match the depth of the joist
- The number of holes dictate the number of nails expected on install
- 316 Stainless Steel
- Perfect for harsh or marine environments
- Single Sizes: for standard sized joists
- Double Sizes: for thicker beams or 2 joists set up side by side
- Only use nails when installing joist hangers
- Ensure joist nails are the same grade as the inverted joist hangers
Inverted Joist Hangers are framing connectors attached to the ends of wood or timber joists to the ledger board.
Joist Hanger Size / Type: | 2 x 6 / Single | 2 x 6 / Double | 2 x 8 / Double | 2 x 10 / Double | ||||
Manufacturer Part Number: | JL26IF-SS | HD26-2IFSS | HD28-2IFSS | HD210-2IFSS | ||||
Simpson Part Number: | LUC26SS | HUC26-2SS | HUC28-2SS | HUC210-2SS | ||||
Dimensions (Width): | 1-9/16" | 3-1/8" | 3-1/8" | 3-1/8" | ||||
Dimensions (Height): | 4-1/2" | 5-1/8" | 7-1/8" | 9" | ||||
Dimensions (Depth): | 1-1/2" | 2-1/2" | 2-1/2" | 2-1/2" | ||||
Floor Load (Lbs.): | 695-830 | 1690 | 1975 | 2540 | ||||
Uplift Load (Lbs.): | 730 | 1140 | 1140 | 1905 | ||||
Steel Gauge: | 18 | 14 | 14 | 14 | ||||
Material: | 316 Stainless Steel |
See Product Specifications
NA = "Not Sold In Single Quantity"
Select Package Quantity
Loading ...
Product Specifications
Corrosion Resistant
Yes
Grade
316
Marine Grade
Yes
Material
Stainless Steel
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances