Print this page
3/4"-10 Hot Dip Galvanized Wedge Anchors

3/4"-10 Hot Dip Galvanized Wedge Anchors

Diameter - Pitch: 3/4"-10

  • Corrosion resistant
  • Molten Zinc bath finishing process creates a bonded alloy coating
  • Used to secure equipment to masonry surfaces
  • Installed into pre-drilled holes
  • Non-threaded end is inserted into the whole then struck to expand
  • The nut is then tightened against the washer to the installation material
  • Used to secure:
    • Materials
    • Pumps
    • Generators
    • Plastics
    • Many More
    • Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.
  • Due to the finishing process for Hot Dip Galvanized fasteners, it is recommended to only use Hot Dip Galvanized fasteners with Hot Dip Galvanized fasteners and not mix metals. This can create threading and durability issues.

A 3/4"-10 Hot Dipped Galvanized Concrete Masonry Wedge Anchor, also sometimes called an anchor bolt or expansion wedge, is used to anchor and secure material and equipment to concrete masonry surfaces. Anchor bolts consist of an expansion wedge bolt, a hex nut, and a flat washer.

Select Products Below See Product Specifications
NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 4-3/4"-
SKU #1070-070-0012
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 4-3/4"-
SKU #1070-070-0012
1
 $5.27 (5.27/ea)
100
 $405.00 (4.05/ea)
1000
 $3,730.00 (3.73/ea)
Subtotal: $0.00 /
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 5-1/2"-
SKU #1070-070-0022
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 5-1/2"-
SKU #1070-070-0022
1
 $5.40 (5.4/ea)
100
 $415.00 (4.15/ea)
1000
 $3,820.00 (3.82/ea)
Subtotal: $0.00 /
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 6-1/4"
SKU #1070-070-0032
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 6-1/4"
SKU #1070-070-0032
1
 $5.69 (5.69/ea)
100
 $438.00 (4.38/ea)
1000
 $4,030.00 (4.03/ea)
Subtotal: $0.00 /
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 8-1/2"
SKU #1070-070-0042
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 8-1/2"
SKU #1070-070-0042
1
 $9.10 (9.1/ea)
100
 $701.00 (7.01/ea)
1000
 $6,440.00 (6.44/ea)
Subtotal: $0.00 /
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 10"
SKU #1070-070-0052
Wedge Anchor Hot Dipped Galvanized - 3/4"-10 x 10"
SKU #1070-070-0052
1
 $11.64 (11.64/ea)
100
 $895.00 (8.95/ea)
1000
 $8,240.00 (8.24/ea)
Subtotal: $0.00 /
Product Specifications
Additional Sizing Info
Wedge Anchors
Color
Gray
Corrosion Resistant
Yes
Drill (Hole) Size
3/4"
Drive Style
External Hex
Finish
Hot Dip Galvanized
Head Style
No Head
Material
Steel
Other
Listed As: Diameter - Thread Pitch x Length from Tip to Tip
Product Type
Wedge Anchors
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
10 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
1-1/8"

Your item has been added to your wish list.

Login

Please login to your customer account to create or access your wish list.

Forgot Password?

If you don't have an account click here to register.

Tell a friend about 3/4"-10 Hot Dip Galvanized Wedge Anchors

Volume Pricing: Buy in volume, get a discount. The larger the pack, the lower the cost per piece. Visit the New Site Features Page for additional details.