#14-14 Square Drive Pan Head Self Driller 410 Stainless Steel Screws

#14-14 Stainless Steel Square Drive Pan Head Self Drilling Screws

Diameter - Thread Pitch: #14-14


  • #14-14
  • Self drilling point to pierce 20 through 14 gauge metals
  • The square drive style provide better hold making them less likely to strip
  • Commonly used in exterior elements
  • 410 Stainless steel square drive pan head self drilling screws are hardened and corrosion resistant
  • Sizes listed below as: Diameter - Thread Pitch
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#14-14 x 3/4"
#14-14 x 3/4"
1 $0.22 (0.22/ea)
100 $18.00 (0.18/ea)
1000 $160.00 (0.16/ea)
Subtotal: $0.00 /
#14-14 x 1"
#14-14 x 1"
1 $0.48 (0.48/ea)
100 $40.00 (0.4/ea)
1000 $360.00 (0.36/ea)
Subtotal: $0.00 /
#14-14 x 1-1/4"
#14-14 x 1-1/4"
1 $0.72 (0.72/ea)
100 $60.00 (0.6/ea)
1000 $540.00 (0.54/ea)
Subtotal: $0.00 /
#14-14 x 1-1/2"
#14-14 x 1-1/2"
1 $0.68 (0.68/ea)
100 $56.00 (0.56/ea)
1000 $510.00 (0.51/ea)
Subtotal: $0.00 /
#14-14 x 2"
#14-14 x 2"
1 $0.68 (0.68/ea)
100 $56.00 (0.56/ea)
1000 $510.00 (0.51/ea)
Subtotal: $0.00 /

Frequently Used With

1 $1.05 (1.05/ea)
10 $8.60 (0.86/ea)
50 $38.50 (0.77/ea)
Subtotal: $0.00
1 $4.84 (4.84/ea)
10 $43.20 (4.32/ea)
50 $194.50 (3.89/ea)
Subtotal: $0.00
1 $0.19 (0.19/ea)
100 $12.00 (0.12/ea)
1000 $110.00 (0.11/ea)
Subtotal: $0.00

Product Specifications
Corrosion Resistant
Yes
Drive Style
Internal Square
Grade
410
Hardness
40 Rockwell C
Head Diameter
Max 0.492 - Min 0.473
Head Style
Pan
Material
Stainless Steel
Overall Head Height
Max 0.144 - Min 0.130 (From Botton to Top of Head)
Point Type
TEK-3 (0.353)
Product Type
Square Drive Pan Head Self Drilling Screws
Square Drive
#3
System of Measurement (Unit)
Inch
Tensile PSI
180,000 PSI Heat Treated
Thread Diameter Major
(#14) 0.246
Thread Diameter Minor
(#14) 0.192
Thread Direction
Right Hand
Thread Pitch (Count)
14 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances