1/4"-20 Flush Hex Drive Threaded Inserts

1/4"-20 EZ Hex Flush Threaded Inserts

Hex Drive Threaded Inserts for Soft Wood


  • Internal Thread Size: 1/4"-20
  • Made from Die Cast Zinc
  • Runs Flush with Installation Surface
  • Hex Drive
  • Intended for use in Soft Wood or Composites

Flush Hex Drive Threaded Inserts are installed the same way as any other threaded insert. They do not have a lip near the head, so they can be installed completely flush with the surface or even a little countersunk. Flush drive threaded inserts are generically referred to as Type E insert nuts.

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Flush Hex Drive Threaded Inserts 1/4"-20 x 0.512
SKU #1060-430-002
Flush Hex Drive Threaded Inserts 1/4"-20 x 0.512
SKU #1060-430-002
1
$0.25 (0.25/ea)
100
$23.00 (0.23/ea)
1000
$200.00 (0.2/ea)
Subtotal: $0.00 /
Flush Hex Drive Threaded Inserts 1/4"-20 x 0.787
SKU #1060-430-012
Flush Hex Drive Threaded Inserts 1/4"-20 x 0.787
SKU #1060-430-012
1
$0.25 (0.25/ea)
100
$24.00 (0.24/ea)
1000
$230.00 (0.23/ea)
Subtotal: $0.00 /

Product Specifications
Color
Yellow/Silver
Drill (Hole) Size
23/64"
Drive Style
Internal Hex (Allen)
Head Style
No Head
Internal Thread
1/4"-20
Material
Zinc
Product Type
Thread Insert
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
20 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances