Carriage Bolts, Stainless Steel 316, 1/4"-20 x 1/2", Full Thread
Diameter - Thread Pitch: 1/4-20
| Quantity | Unit price |
|---|---|
| To 99 |
$0.47*
|
| To 999 |
$0.35*
|
| From 1000 |
$0.32*
|
- Color: Silver
- Corner Radius on Square: 0.031"
- Corrosion Resistant: Yes
- Diameter: 1/4"
- Head Type: Dome Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Filet Radius: 0.031
- Fit: 2A
- FT = Full Thread: Yes
- Grade: 316
- Head Height: Max 0.145 - Min 0.125
- Head Height Max: 0.145
- Head Diameter: Max 0.594 - Min 0.563
- Head Style: Dome
- Length: 1/2"
- Marine Grade: Yes
- Material: Stainless Steel
- Overall Head Height: Max 0.145 - Min 0.125
- Product Type: Carriage Bolt
- Square Neck Depth: Max 0.156 - Min 0.125
- Square Neck Width: Max 0.260 - Min 0.245
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 20 Per Inch
- Thread Size: 1/4"-20
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Square section grips into the part being fixed (typically wood)
- Carriage bolts are threaded all the way down to the square section beneath the head
- Prevents the bolt from turning when the nut is tightened
- 316 Stainless steel is corrosion and rust resistant
- 316 Stainless steel is considered the fastener industry standard
1/4"-20 Carriage bolts have a domed or countersunk head, and the shank is topped by a short square section under the head.
Diameter x Thread Pitch x Length from Under Head
FT: Fully Threaded
PT: Partially Threaded
Product number:
6006-004-002