Roofing Screws, ProZ™ Self Driller T3 Hi-Lo, Hex Washer Cap, Unpainted, #12 x 1"
Unpainted Self Driller Point T3 Screws with EPDM Washer
| Quantity | Unit price |
|---|---|
| To 99 |
$0.33*
|
| To 999 |
$0.29*
|
| From 1000 |
$0.25*
|
- Color (Duplicate): Silver
- Color: Silver
- Condition: New
- Diameter: #12
- Drive Style: External Hex
- Head Type: Hex Cap Head
- Thread Direction: Right Hand
- Thread Type: Hi-Lo
- Finish: Zinc
- Head Size: 5/16 inch
- Head Style: Hex Cap
- Length: 1"
- Material (Duplicate): Carbon Steel
- Material: Carbon Steel
- Part Number: 3661124122466
- Pattern: Roofing Screws
- Point Type: Self Driller
- Product Type: Roofing Screws
- Size: #12 x 1"
- Size System: US
- Size Type: Regular
- System of Measurement: Inch
- TEK Self Drilling Point: TEK 3
- Thread Direction: Right Hand
- Thread Pitch: 12 Per Inch
- Thread Size: #12
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 0.03
- Wrench Size: 1/2 inch
#12 ProZ™ SD T3 Hi-Lo Threaded Hex Cap Roofing Screw with EPDM Washer - Ideal for Metal to Metal Applications
- Zinc Aluminum Alloy Cap prevents red rust for long-lasting performance
- Durable EPDM Rubber Washer creates a tight weather seal
- T3 (Type #3) Self-drilling point eliminates the need for pre-drilling holes
- Can drill through steel up to 0.210" thick
- ProZ SD cap withstands the toughest installation conditions
- Delivers superior pull-out strength (varies based on screw length)
- Hi-Lo thread design provides enhanced holding power
- Perfect for attaching metal roofing, siding, and more
The #12 ProZ™ SD T3 Hi-Lo Threaded Hex Cap Roofing Screw has an EPDM Washer. This screw is ideal for fastening metal to metal. The ProZ™ self drilling fastener has a special cap that stops rust, keeping it looking good for a long time. The durable EPDM rubber washer creates a tight weather seal, protecting against the elements.
EPDM stands for Ethylene Propylene Diene Monomer, which is a type of synthetic rubber commonly used in roofing applications. It helps create a strong seal against the weather. This rubber washer stops water from getting in and protects against the weather. It creates a strong seal for metal-to-metal connections.
The #12 ProZ™ SD T3 Hi-Lo threaded Hex Cap Roofing Screw is a high-quality fastener designed for use in roofing applications. A self-drilling screw can penetrate the material without the need for pre-drilling. The screw has a Type #3 (T3) point that makes it easy to install in metal roofing materials. This feature makes it easy for the screw to drill through steel up to 0.210" thick without needing pilot holes first.
The design of the washer head reduces overdriving. This ensures that it installs correctly without causing damage to the attached material. This feature also helps to provide a more consistent and uniform finish to the installation.
The Zinc aluminum alloy coating on the fastener serves as a protective barrier against red rust and corrosion. This makes the fastener perfect for outdoor or high-moisture areas where rust and corrosion are common problems. This coating make this fastener reliable and durable for many uses.
Hi-Lo thread design refers to a type of screw thread that combines high and low threads on the same screw. The tall threads provide a strong hold and superior grip. The short threads help the metal to metal screw enter the material faster when fastening. The #12 ProZ™ self tapping screw provides strong holding power because of this design.
Available Sizes:
- #12 x 1"
- #12 x 1-1/4"
- #12 x 1-1/2"
- #12 x 2"
- #12 x 3"
Experience the difference of the #12 ProZ™ SD T3 Hi-Lo Threaded Hex Cap Roofing Screw with EPDM Washer. The ProZ fasteners line offers this high-quality screw that you can use for drilling into metal. Choose the size that best fits your project needs and enjoy a strong, weather-tight hold that lasts. Easy to install and offers long-lasting protection from the elements.