Sheet Metal Screws, Phillips Flat Head, Self Driller TEK 3, Zinc Plated Steel, #12 x 3/4"
Diameter - Thread Pitch: #12-14
| Quantity | Unit price |
|---|---|
| To 99 |
$0.15*
|
| To 999 |
$0.10*
|
| From 1000 |
$0.08*
|
- ANSI: B18.6.4
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: #12
- Drive Style: Phillips
- Head Type: Flat Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Finish: Zinc Plated
- Hardness: 40 Rockwell C
- Head Height Max: 0.132
- Head Diameter: Max 0.438 - Min 0.389
- Head Style: Flat
- Length: 3/4"
- Material: Stainless Steel
- Phillips Drive: #2
- Point Type: TEK
- Product Type: Sheet Metal Screws
- System of Measurement: Inch
- TEK Self Drilling Point: TEK 3
- Thread Direction: Right Hand
- Thread Pitch: 14 Per Inch
- Thread Size: #12
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Yield PSI: 150,000 PSI
- #12-14
- CR+3 Zinc to easily drill into materials
- Countersunk head that runs flush with the installation surface
- #3 Self drilling (TEK) point
- Zinc plated phillips flat head self drilling screws are hardened to make drilling easy
- NOTE: Sheet metal screws provide excellent retention in wood but can be difficult to remove
Product number:
1070-104-0002