Carriage Bolts, Stainless Steel 316, 1/2"-13 x 1", Full Thread
Diameter - Thread Pitch: 1/2-13
Quantity | Unit price |
---|---|
To 99 |
$3.07*
|
To 999 |
$1.97*
|
From 1000 |
$1.96*
|
- Color: Silver
- Corner Radius on Square: 0.047"
- Corrosion Resistant: Yes
- Diameter: 1/2"
- Head Type: Dome Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Filet Radius: 0.031
- Fit: 2A
- FT = Full Thread: Yes
- Grade: 316
- Head Height: Max 0.270 - Min 0.250
- Head Height Max: 0.27
- Head Diameter: Max 1.094 - Min 1.032
- Head Style: Dome
- Length: 1"
- Marine Grade: Yes
- Material: Stainless Steel
- Overall Head Height: Max 0.270 - Min 0.250
- Product Type: Carriage Bolt
- Square Neck Depth: Max 0.281 - Min 0.250
- Square Neck Width: Max 0.515 - Min 0.492
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 13 Per Inch
- Thread Size: 1/2"-13
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Square section grips into the part being fixed (typically wood)
- Carriage bolts are threaded all the way down to the square section beneath the head
- Prevents the bolt from turning when the nut is tightened
- 316 Stainless steel is corrosion and rust resistant
- 316 Stainless steel is considered the fastener industry standard
1/2"-13 Carriage bolts have a domed or countersunk head, and the shank is topped by a short square section under the head.
All Carriage Bolts over 6" in length are Partially Threaded
Diameter x Thread Pitch x Length from Under Head
FT: Fully Threaded
PT: Partially Threaded
Product number:
6006-010-002