Machine Screws, Knurled Thumb, Brass, #10-32 x 3/8"
Diameter - Thread Pitch: #10-32
| Quantity | Unit price |
|---|---|
| To 99 |
$1.12*
|
| To 999 |
$0.92*
|
| From 1000 |
$0.84*
|
- ANSI: B18.6.3
- Color: Yellow
- Color May Vary: Color and sheen may vary
- Condition: New
- Corrosion Resistant: Yes
- Diameter: #10
- Drive Style: Thumb
- Elongation: 10% - 25%
- Head Type: Knurled Head
- Thread Direction: Right Hand
- Thread Type: Fine
- Fit: 2A
- Hardness: 40-75 Rockwell B
- Head Diameter: 0.440" (Just Over 7/16")
- Head Style: Thumb
- Length: 3/8"
- Material: Brass
- Overall Head Height: 3/8" (From Bottom to Top of Head)
- Part Number: 661291493218
- Product Type: Thumb Screw
- Size System: US
- Size Type: Regular
- Standards Met: ANSI B18.6.3
- System of Measurement: Inch
- Tensile PSI: 50,000 - 65,000 PSI
- Thread Diameter: (#10) Max 0.1890 - Min 0.1818
- Thread Direction: Right Hand
- Thread Pitch: 32 Per Inch
- Thread Size: #10-32
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Yield PSI: 30,000 - 50,000 PSI
- Knurled head intended to be driven by fingers
- ASME Standards specific
- A machine screw is commonly identified by its small size
- Aesthetically pleasing and typically used for ornamental products
- The more zinc in a screw the lighter it will tend to be
- Brass is corrosive resistant but very soft material
- Commonly used for:
- Firearms
- Weather Stripping
- Pipes
#10-32 Knurled head thumb machine screws are available in corrosion resistant brass.
NOTE: Color and sheen may vary
Product number:
1018-10003-0002
Skip product gallery
Flat Washers, Brass, #10 Small (.20 ID x .437 OD x .036 Thick)
From
$0.08*
Subscription
Flat Washers, Brass, #10 Large (.20 ID x .500 OD x .040 Thick)
From
$0.09*
Subscription
Wing Nuts, Brass, #10/32 (Wing Span .91/.78 x .171 Thick)
From
$0.18*
Subscription
Frequently Used With
Size:
#10 Small
Size:
#10 Large
Internal Diameter - Thread Pitch:
#10-32