Sheet Metal Screws, Phillips Oval Head, Stainless Steel 316, #10

Sheet Metal Screws, Phillips Oval Head, Stainless Steel 316, #10

Diameter - Thread Pitch: #10-12


  • #10-12
  • Raised decorative head
  • Notched at the tip to aid in chip removal
  • Threads cut into material for a stronger hold
  • 316 Stainless steel Phillips oval head sheet metal screws are extremely rust resistant
  • 316 stainless steel is ideal in highly corrosive environments
  • Sizes listed below as: Diameter - Thread Pitch

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
#10-12 x 1/2"
#10-12 x 1/2"
1 $0.18 (0.18/ea)
100 $12.00 (0.12/ea)
1000 $110.00 (0.11/ea)
Subtotal: $0.00 /
#10-12 x 3/4"
#10-12 x 3/4"
1 $0.22 (0.22/ea)
100 $16.00 (0.16/ea)
1000 $140.00 (0.14/ea)
Subtotal: $0.00 /
#10-12 x 1"
#10-12 x 1"
1 $0.24 (0.24/ea)
100 $18.00 (0.18/ea)
1000 $160.00 (0.16/ea)
Subtotal: $0.00 /
#10-12 x 1-1/4"
#10-12 x 1-1/4"
1 $0.28 (0.28/ea)
100 $21.00 (0.21/ea)
1000 $190.00 (0.19/ea)
Subtotal: $0.00 /
#10-12 x 1-1/2"
#10-12 x 1-1/2"
1 $0.31 (0.31/ea)
100 $23.00 (0.23/ea)
1000 $200.00 (0.2/ea)
Subtotal: $0.00 /
#10-12 x 1-3/4"
#10-12 x 1-3/4"
1 $0.37 (0.37/ea)
100 $28.00 (0.28/ea)
1000 $250.00 (0.25/ea)
Subtotal: $0.00 /
#10-12 x 2"
#10-12 x 2"
1 $0.45 (0.45/ea)
100 $33.00 (0.33/ea)
1000 $290.00 (0.29/ea)
Subtotal: $0.00 /
#10-12 x 2-1/2"
#10-12 x 2-1/2"
1 $0.62 (0.62/ea)
100 $41.00 (0.41/ea)
1000 $360.00 (0.36/ea)
Subtotal: $0.00 /
#10-12 x 3"
#10-12 x 3"
1 $0.65 (0.65/ea)
100 $44.00 (0.44/ea)
1000 $380.00 (0.38/ea)
Subtotal: $0.00 /

Frequently Used With

1 $0.11 (0.11/ea)
100 $5.00 (0.05/ea)
1000 $40.00 (0.04/ea)
Subtotal: $0.00
1 $0.06 (0.06/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00
1 $1.04 (1.04/ea)
10 $8.10 (0.81/ea)
50 $38.00 (0.76/ea)
Subtotal: $0.00
1 $1.06 (1.06/ea)
10 $10.00 (1/ea)
50 $48.00 (0.96/ea)
Subtotal: $0.00
1 $1.94 (1.94/ea)
10 $13.30 (1.33/ea)
Subtotal: $0.00

Product Specifications
ANSI
ANSI B18.6.3
Color
Silver
Corrosion Resistant
Yes
Diameter
#10
Drive Style
Phillips
Grade
316
Head Diameter
Max 0.385 - Min 0.340
Head Height Max
0.176
Head Style
Oval
Marine Grade
Yes
Material
Stainless Steel
Overall Head Height
Max 0.176 - Min 0.148
Phillips Drive
#2
Point Type
A
Product Type
Sheet Metal Screws
Standards Met
ANSI B18.6.3
System of Measurement (Unit)
Inch
Thread Diameter Major
(#10) 0.194 - 0.188
Thread Diameter Minor
(#10) 0.133 - 0.126
Thread Direction
Right Hand
Thread Pitch (Count)
12 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances