Sheet Metal Screws, Phillips Truss Head, Stainless Steel 316, #10 x 1/2"
Diameter - Thread Pitch: #10-12
| Quantity | Unit price |
|---|---|
| To 99 |
$0.26*
|
| To 999 |
$0.21*
|
| From 1000 |
$0.18*
|
- ANSI: ANSI B18.6.4
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: #10
- Drive Style: Phillips
- Elongation: 30%
- Head Type: Truss Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Grade: 316
- Hardness: 100 Rockwell B
- Head Height Max: 0.118
- Head Diameter: Max 0.448 - Min 0.425
- Head Style: Truss
- Length: 1/2"
- Marine Grade: Yes
- Material: Stainless Steel
- Overall Head Height: Max 0.118 - Min 0.103
- Phillips Drive: #2
- Point Type: A
- Product Type: Sheet Metal Screws
- Reduction: 0.4
- Standards Met: ANSI B18.6.4
- System of Measurement: Inch
- Thread Diameter Major: (#10) 0.194" - 0.188"
- Thread Diameter Minor: (#10) 0.133" - 0.126"
- Thread Direction: Right Hand
- Thread Pitch: 12 Per Inch
- Thread Size: #10-12
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Yield PSI: 55,000 - 75,000 PSI
- #10-12
- Sharp cutting threads that cut into material for better retention
- Fully Threaded
- Excellent for attaching metal hardware to wood
- 316 Stainless steel Phillips truss head sheet metal screws are very corrosion resistant
- Suitable for salt water moisture environments
- Most commonly used for:
- Sheet Metal
- Wood
- Plastic
- Sizes listed below as: Diameter - Thread Pitch
Product number:
6014-006-002