#10-16 Hex Washer Head TEK-3 Self Driller Strong-Shield Coating

#10-16 Strong Shield Hex Washer Head Self Drilling Screws

Strong-Shield Coating | TEK-3


#10-16 Hex Washer Head Self Driller Screws come with a TEK-3 point for drilling and a Strong-Shield Coating for increased corrosion resistance.

  • #10-16
  • Hexagon drive for use with a wrench or socket
  • Fully Threaded from tip to head
  • Integral washer at the top of the head to minimize chance of pull-through
  • Washer portion of screw distributes pressure over a larger surface area
  • TEK 3 Point used for drilling into structural steel
  • Strong-Shield Coating:
    • High corrosion resistance
    • Protection from acid rain & rust
    • Works with ACQ treated lumber
    • Exceeds 1,000/hrs. salt spray resistance
Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Hex Washer Head TEK-3 Self Driller Strong-Shield Coating - #10-16 x 3/4"
SKU #1008-002-0002
Hex Washer Head TEK-3 Self Driller Strong-Shield Coating - #10-16 x 3/4"
SKU #1008-002-0002
1
NA
25
$3.25 (0.13/ea)
100
$8.00 (0.08/ea)
1000
$60.00 (0.06/ea)
Subtotal: $0.00 /
Hex Washer Head TEK-3 Self Driller Strong-Shield Coating - #10-16 x 1"
SKU #1008-002-0012
Hex Washer Head TEK-3 Self Driller Strong-Shield Coating - #10-16 x 1"
SKU #1008-002-0012
1
NA
25
$3.75 (0.15/ea)
100
$9.00 (0.09/ea)
1000
$70.00 (0.07/ea)
Subtotal: $0.00 /
Hex Washer Head TEK-3 Self Driller Strong-Shield Coating - #10-16 x 1-1/2"
SKU #1008-002-0022
Hex Washer Head TEK-3 Self Driller Strong-Shield Coating - #10-16 x 1-1/2"
SKU #1008-002-0022
1
NA
25
$4.25 (0.17/ea)
100
$11.00 (0.11/ea)
1000
$100.00 (0.1/ea)
Subtotal: $0.00 /

Product Specifications
ASTM
C1513 & A 510
Color
Silver/Gray
Corrosion Resistant
Yes
Diameter
#10
Drive Style
External Hex
Finish
Strong-Shield
Head Size
5/16"
Head Style
Hex Washer
Material
Carbon Steel
Point Type
TEK
Product Type
Self Drilling Screws
Standards Met
ASTM C 1513 & ASTM A 510, F.I.P.-1000.7, SAE J78
System of Measurement (Unit)
Inch
TEK Self Drilling Point
TEK-3 (0.353)
Thread Diameter Major
(#10) 0.189"
Thread Diameter Minor
(#10) 0.141"
Thread Direction
Right Hand
Thread Pitch (Count)
16 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
5/16"