1/4" Zinc Plated Acoustical Wedge Anchors

1/4" Zinc Plated Acoustical Wedge Anchors

Anchor Bolt "Eye" Diameter: 1/4"


1/4" (CR+3) Zinc plated steel Acoustical Wedge Anchors are used to secure or anchor suspended wire to masonry surfaces, typically concrete ceilings.

  • Used to anchor wiring to masonry materials such as concrete
  • Installed into pre-drilled holes
  • Non-threaded end is inserted into the whole then struck to expand
  • The "eye" of the anchor has a 1/4" Diameter
  • Corrosion resistant
  • Not recommended for exterior use

Select Products Below
See Product Specifications
Size:
Qty
Size
Select Package Quantity
SubTotal
Loading ...



Product Specifications
Across Flats (Width)
7/16" (Max 0.437 - Min 0.428)
Body Diameter
1/4", Max 0.250 - Min 0.245
Color
Silver
Drill (Hole) Size
1/4"
Drive Style
Internal Hex (Allen)
Eye Inside Diameter
1/4"
Finish
Zinc Plated
Grade
5
Head Style
Socket Cap
Material
Steel
Other
Listed As: Diameter - Thread Pitch x Length from Tip to Tip
Product Type
Acoustical Anchors
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
7/16"