Hex Tap Bolts 18-8 Stainless Steel #10-32

#10-32 Stainless Steel Hex Tap Bolts

Diameter - Thread Pitch: #10 - 32 | 18-8 SS


  • #10-32
  • Hexagon head designed to be driven by a wrench or socket
  • A Tap bolt is always full threaded regardless of length
  • Also referred to as a hex bolt
  • 18-8 Stainless steel tap screws offer protection from weather and corrosive environments
  • Rust resistant in freshwater environments
  • For saltwater environments use the 316 stainless steel version

A Hex Bolt is measured as: Diameter x Thread Pitch x Length from Under Head

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Hex Tap Bolt 304 SS - #10-32 x 1/2"
SKU #100002
Hex Tap Bolt 304 SS - #10-32 x 1/2"
SKU #100002
1
NA
25
$5.75 (0.23/ea)
100
$17.00 (0.17/ea)
1000
$150.00 (0.15/ea)
Subtotal: $0.00 /
Hex Tap Bolt 304 SS - #10-32 x 5/8"
SKU #100008
Hex Tap Bolt 304 SS - #10-32 x 5/8"
SKU #100008
1
NA
25
$6.75 (0.27/ea)
100
$20.00 (0.2/ea)
1000
$170.00 (0.17/ea)
Subtotal: $0.00 /
Hex Tap Bolt 304 SS - #10-32 x 3/4"
SKU #100014
Hex Tap Bolt 304 SS - #10-32 x 3/4"
SKU #100014
1
NA
25
$6.25 (0.25/ea)
100
$19.00 (0.19/ea)
1000
$160.00 (0.16/ea)
Subtotal: $0.00 /
Hex Tap Bolt 304 SS - #10-32 x 1"
SKU #100020
Hex Tap Bolt 304 SS - #10-32 x 1"
SKU #100020
1
NA
25
$7.75 (0.31/ea)
100
$25.00 (0.25/ea)
1000
$230.00 (0.23/ea)
Subtotal: $0.00 /
Hex Tap Bolt 304 SS - #10-32 x 1-1/4"
SKU #100026
Hex Tap Bolt 304 SS - #10-32 x 1-1/4"
SKU #100026
1
NA
25
$9.50 (0.38/ea)
100
$30.00 (0.3/ea)
1000
$290.00 (0.29/ea)
Subtotal: $0.00 /
Hex Tap Bolt 304 SS - #10-32 x 1-1/2"
SKU #100032
Hex Tap Bolt 304 SS - #10-32 x 1-1/2"
SKU #100032
1
NA
25
$9.50 (0.38/ea)
100
$30.00 (0.3/ea)
1000
$290.00 (0.29/ea)
Subtotal: $0.00 /
Hex Tap Bolt 304 SS - #10-32 x 2"
SKU #100038
Hex Tap Bolt 304 SS - #10-32 x 2"
SKU #100038
1
NA
25
$11.00 (0.44/ea)
100
$41.00 (0.41/ea)
1000
$390.00 (0.39/ea)
Subtotal: $0.00 /



FREQUENTLY USED WITH

1
NA
25
$1.50 (0.06/ea)
100
$3.00 (0.03/ea)
1000
$20.00 (0.02/ea)
Subtotal: $0.00 /
1
NA
25
$1.75 (0.07/ea)
100
$5.00 (0.05/ea)
1000
$40.00 (0.04/ea)
Subtotal: $0.00 /

Product Specifications
Class
2A
Color
Silver
Corrosion Resistant
Yes
Diameter
#10
Drive Style
External Hex
FT = Full Thread
Yes
Grade
18-8
Hardness
100 Rockwell B
Head Height Max
0.12
Head Style
Hex
Material
Stainless Steel
Overall Head Height
Max 0.120 - Min 0.111
Product Type
Hex Tap Bolts
System of Measurement (Unit)
Inch
Tensile PSI
100,000 - 125,000
Thread Direction
Right Hand
Thread Pitch (Count)
32 Per Inch
Thread Standard
UNF
Thread Type
Fine
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Wrench Size
5/16"
Yield PSI
55,000 - 75,000