Why hot dipped galvanized jaw and eye turnbuckles?
Hot dip galvanizing immerses the turnbuckle in molten zinc for a much thicker coating than electroplating, giving lasting corrosion resistance for outdoor tensioning. The jaw and eye configuration handles mixed anchor points: the jaw bolts directly to a pin, bracket, or fixed lug, while the eye connects to a shackle or sling. Rotate the body to take up slack and tension the line. This suits outdoor overhead and structural tensioning where the two ends connect to different hardware and the assembly is exposed to weather. Keep the pull in-line, maintain thread engagement, and confirm the working load limit for every component. For harsh coastal or marine exposure, choose stainless.
Why choose hot dipped galvanized jaw and eye turnbuckles
- Thick zinc coating: lasting corrosion resistance outdoors.
- Mixed ends: jaw to a fixed lug, eye to a shackle.
- Adjustable tension: rotate the body to take up slack.
- Outdoor durable: for exterior structural rigging.
Common applications for galvanized jaw and eye turnbuckles
- Outdoor overhead and structural tensioning
- Connecting a fixed lug to a wire rope sling
- Exterior mixed-connection rigging
- Weather-exposed tension assemblies
For economical indoor use, see carbon steel jaw and eye turnbuckles, and browse every option on the main turnbuckles category.
Hot Dipped Galvanized Jaw and Eye Turnbuckles FAQ
Why galvanized for turnbuckles?
Hot dip galvanizing gives a thick, durable zinc coating that resists corrosion far longer outdoors, suited to exterior structural tensioning.
How does the jaw end connect?
Open the jaw bolt, seat the jaw over the pin or lug, reinsert the bolt, and tighten the nut fully.
Can turnbuckles be loaded at an angle?
No. Keep the pull in-line and avoid angles that create side-load.