Metric Hex Cap Screws, Stainless Steel A2 (18-8), Partial Thread, M16 x 2.0 x 90M
Diameter - Thread Pitch: M16-2.00
| Quantity | Unit price |
|---|---|
| To 99 |
$5.05*
|
| To 999 |
$4.87*
|
| From 1000 |
$4.65*
|
- Across Flats (Width): 24mm (Max 36.00mm - Min 35.00mm)
- Color: Silver
- Condition: New
- Corrosion Resistant: Yes
- Diameter: M16
- Drive Style: External Hex
- Head Type: Hex Head
- Thread Direction: Right Hand
- Thread Type: Coarse
- Fit: 6g
- FT = Full Thread: No
- Grade: A2
- Head Height: Max 10.18 - Min 9.82
- Head Height Basic: 10 mm
- Head Style: Hex
- Length: 90M
- Material: Stainless Steel
- Part Number: 661291507984
- Product Type: Metric Hex Cap Screws
- Size System: US
- Size Type: Regular
- System of Measurement: Metric
- Thread Direction: Right Hand
- Thread Pitch: 2.00 mm
- Thread Size: M16
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Weight: 1 lb
- Wrench Size: 24mm
- M16-2.00
- Metric hex head is designed to be driven by a socket or wrench
- Also referred to as metric tap bolts or hex bolts
- A metric tap bolt has a smaller head than a standard hex head bolt
- A2 Stainless steel metric hex cap screws are rust resistant
- DIN 930-933/ISO 4014-4017 compliant
A Hex Bolt is measured as: Diameter - Thread Pitch x Length from Under Head
Partially Threaded in Lengths 30mm and up
FT = Full ThreadPT = Partial Thread
Frequently Used With
