Waxed Nylon Lock Nuts, Stainless Steel 316, 1"-8
Wax Coated Nylon Lock Nut to Eliminate Thread Galling
| Quantity | Unit price |
|---|---|
| To 99 |
$59.40*
|
| To 999 |
$49.01*
|
| From 1000 |
$44.55*
|
- Across Flats (Width): 1-3/64"
- Color: Silver
- Corrosion Resistant: Yes
- Diameter: 1"
- Drive Style: External Hex
- Thread Direction: Right Hand
- Finish: Waxed Internal Thread
- Fit: 2B
- Grade: 316
- Internal Thread: 1"-8
- Marine Grade: Yes
- Material: Stainless Steel
- Other: Waxed to add lubricity and help prevent thread seizing
- Product Type: Waxed Nylon Insert Lock Nut
- System of Measurement: Inch
- Thread Direction: Right Hand
- Thread Pitch: 8 Per Inch
- Thread Size: 1"-8
- Thread Standard: UNC
- Thread Type: Coarse
- Tolerance (IFI): Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
- Video Embed Code: 0K_MdHmWGOA
- Video Thumbnail Image: graphics/00000001/waxed-nylocks-prevent-galling-thumbnail.jpg
|
|
|
*Even when using Waxed Nylon Insert Lock Nuts, we still recommend using MRO Anti-Seize Solution 2400 to further deter thread galling during any 316 stainless steel fastener installation.
| Nylon Insert Lock Nut Size | Width Across Flats | Height / Thickness |
| #4 | 0.251" | 0.153" |
| #6 | 0.313" | 0.188" |
| #8 | 0.345" | 0.239" |
| #10 | 0.376" | 0.249" |
| #12 | 0.439" | 0.328" |
| 1/4" | 0.439" | 0.328" |
| 5/16" | 0.502" | 0.359" |
| 3/8" | 0.563" | 0.468" |
| 7/16" | 0.627" | 0.468" |
| 1/2" | 0.752" | 0.609" |
| 9/16" | 0.877" | 0.656" |
| 5/8" | 0.940" | 0.765" |
| 3/4" | 1.064" | 0.890" |
| 7/8" | 1.252" | 0.999" |
| 1" | 1.44" | 1.078" |
Product number:
6002-010-182
